Among Our Greatest Crepe Tapes
This highly versatile tape has all the features that are desirable for a high performance masking tape, such as strong adhesion, tough backing, excellent heat resistance and easy removal. It remains in place around corners, contours, and irregular surfaces to provide sharp paint lines in paint applications. 3M Performance Masking Tape 2380 has been laboratory tested on painted steel panels and found to remove cleanly for up to 30 minutes at bake temperatures up to 325?F/ 162?C. The adhesive bonds instantly to paper, metal, wood, and painted surfaces with reliable holding power that resists lifting and curling, essential for producing precise paint lines. 3M Performance Masking Tape 2380 also features one-piece removal and is sliver resistant under normal operating conditions.
Recommended Applications
Industrial paint masking for specialty vehicle, automotive, rail, marine and aerospace paint jobs
Paint masking for high temperature paint processes
Paint masking for custom, two-tone and multiple color applications
What is Masking Tape?
Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. Masking tapes from 3M adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application.
A masking tape should specify what surfaces it will stick to and the interval over which it will remove cleanly. A very thin or poorly manufactured tape may demonstrate splintering or shredding, either coming off the roll or when being removed after use. Some masking tapes have the tensile strength for light commercial and industrial applications, including bundling, labeling, sealing, temporary repairs, lane marking, splicing, and surface protection. From wide to narrow, single rolls to bulk, there are many options to choose from when ordering masking tape. The classic crepe paper masking tape is a light tan color, but masking tapes from 3M come in a variety of colors and formulations to meet general and specific applications. From wide to narrow, single rolls to bulk, there are many options to choose from when ordering masking tape. A roll of masking tape is a basic toolbox or supply room item in construction, warehousing, military, marine, shipping, automotive aftermarket, and general manufacturing.

Dynabrade 57039 Adaptor, Stamped 57010, 12K RPM
Dynabrade 07102 Air Motor
Dynabrade 68101 Coolant Filtration System, 230 V (AC), 1 Phase, 50 Hz
Dynabrade 91648 2" W x 48" L 320 Grit A/O DynaCut Belt, 10/pack
Dynabrade 78666 1/2" Dia. x 1-1/2" W x 1/8" Center Hole, Tapered Cartridge Rolls, A/O, 180 Grit, 100/pack
Dynabrade X61 6" (152 mm) Dia. Non-Vacuum Dynorbital Extreme Random Orbital Sander, .3 HP, 12,000 RPM, 3/16" Orbit, PSA
Dynabrade 48327 .4 hp Straight-Line Die Grinder, Rear Exhaust, 30,000 RPM, 1/4" Collet
Dynabrade 15111 Felt Silencer
Dynabrade 79143 1/8" W x 24" L 80 Grit Ceramic DynaCut Belts, 50/pack
Dynabrade DAQ6 6" Dia. National Detroit Dual-Action Sander, Non-Vacuum
Dynabrade 01025 O-Ring
Dynabrade 91327 11-1/4" Dia. x 60 Micron A/O Hook "O"-style Vacuum Microfinishing Disc, 10/Box
Dyanbrade NF1B NitroFile Abrasive Belt Tool with 11206 Contact Arm and 15352 Drive Wheel, 5.hp 7 Degree Offset, 20,000 RPM, Gearless, Front Exhaust
Dynabrade 53594 Housing for Model 51812, 100,000 RPM
Dynabrade 52439 3" (76 mm) Dia. Right Angle Diamond Cut-Off Wheel Tool
Dynabrade 78688 D6 Cartridge Roll Mandrel 1/8" Pilot Dia. x 1/2" Pilot Length, 1/8" Shank Dia. x 1" Shank Length
Dynabrade 42733 Carbon Brush
Dynabrade 78324 2" Dia. x 1" W x 1/4" Shank, 180 Grit, A/O DynaCut Flap Wheel, 10/pack
Dynabrade 57053 Speed Regulator
Dynabrade 52278 .7 hp Straight-Line Die Grinder, Rear Exhaust, 20,000 RPM, 1/4" Collet
Dynabrade 96174 Motor Tune-Up Kit
Dynabrade 53079 1/4" Straight-Line Drill, .4 HP, Rear Exhaust, 5,000 RPM
Dynabrade 90678 2" W x 30" L 80 Grit A/O DynaCut Belt, 10/pack
Dynabrade NS11V 11" Dia. Random Orbital Sander, Vacuum
Dynabrade 53078 1/4" Straight-Line Drill, .4 HP, Rear Exhaust, 3,200 RPM
Dynabrade 62647 Collection Bag 3-Pack
Dynabrade 13512 Dynastraight 6" (152 mm) Extension Finishing Tool, 1 HP, Rear Exhaust, 3,400 RPM, 1/2" (13 mm) Dia. Arbor 