- The most common mineral used in a wide range of good, general purpose abrasive products for use primarily on softer materials. It lacks the hardness of some other abrasive minerals but delivers a dependable performance where high pressure/high heat applies
- Backsplash corners.
Abrasive Specifications
Mfr. Part # 91327
| Abrasive Category | Coated Abrasives |
|---|---|
| Abrasive Diameter [inches] | 11-1/4″ |
| Abrasive Mineral Type | AO |
| Abrasive Shape | Discs |
| Diameter [inches] | 11-1/4″ |
| Abrasive Sub Shape | Hook and Loop |
| CE Certified | No |
| EAC Certified | No |
| Height [inches] | 0.0 |
| Length [inches] | 0.0 |
| Weight [pounds] | 0.0 |
| Width [inches] | 0.0 |
| Micron | 100.0 |
| Vacuum Type | Vacuum |
| Abrasive Backing Material | Film |
| Abrasive Sub Shape 2 | Vacuum |
| Abrasive Sub Shape 3 | Film |
| Abrasive Tier | Better |
| Case Qty | 10.0 |
| EAN (UPC) Code | 0616026913257 |
| Quantity Each Pack | 10 |
| Abrasive Grit / Grade | 60 |
| Type | Coated |
Related products
Dynabelter Contact Arms
Dynabrade 11684 Dynabelter Contact Arm Assembly 4″ DIA X 5/8″ W., 40 Duro Serrated
$438.51

Dynabrade 61475 - 1/2" x 25' Grounded Air Supply Line
Dynabrade 61201 RaptorVac Electric DrumVac Kit, Dual Operator, For Use With Tools
3M 03786, Vinyl Tape 471, Blue, 1 1/2 in x 36 yd, 5.2 mil, 7000048380
Dynabrade M1002EX Mini Raptor Vac Pack, Standard
Dynabrade 15346 Contact Wheel Ass'y, 2" Dia. x 5/8" W x 5/8" I.D., Crown Face, 40 Duro Rubber
Dynabrade 78782 DynaCut Wire Cup Brush 3" Dia. x .014 5/8-11 UNC AH Steel
Dynabrade 54789 4" (102 mm) Dia. Extended Right Angle Type 27 Depressed Center Wheel Grinder, Steel Housing, .7 HP, 12,000 RPM, 3/8"-24 Spindle
Dynabrade 90229 1/4" W x 18" L Medium NWN DynaBrite Premium Belt, 10/pack
Dynabrade 53181 3/8"-24 Male _ 1/2"-20 Male, 1" Length
Dynabrade 90040 5" Dia. Foam, Flat Face Polishing Pad
Dynabrade 52433 4" (102 mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, Rear Exhaust, .7 HP, 20,000 RPM, 3/8"-24 Spindle 
