-
×
ACS CX1250 Diamond Belt, 1/2" X 24" 125u
12 × $7.60 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
1000 × $0.73 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $500.06 -
×
3M 19674, Scotch-Seal Industrial Sealant 800, Reddish Brown, 5 oz Tube, 7000000792, 36/Case
72 × $23.31 -
×
Standard Abrasives 827620, Buff and Blend HP Power Pad, 6 in x 9 in, A VFN, 7010310293, 50 ea/Case
1 × $190.45 -
×
3M 15913, Scotch-Brite Roloc Disc High Strength, TR, 2 in X NH A Medium, 7000000710
200 × $1.72 -
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $80.58 -
×
Norton 66623325035 - 2" 120 Grit Fine Grade Aluminum Oxide Vortex Rapid Prep Green TR Non-Woven Surface Preparation Disc, 50 Each
50 × $1.70 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $1,012.00 -
×
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
1 × $129.94 -
×
Dynabrade 51810 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/8" Collet
1 × $751.00 -
×
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
1 × $502.78 -
×
3M 50258, Roloc Disc 777F, 60 YF-weight, TSM, 3 in, Die RS300VM, 7010325551
200 × $1.43 -
×
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
1 × $915.00 -
×
3M 88892, PSA Cloth Disc 348D, 60 X-weight, 15 in x NH, Die 1500A, 7010360718
20 × $13.07 -
×
3M 20907, PSA Cloth Disc 348D, P120 X-weight, 2 in x NH, Die 200P, 7000118875
200 × $0.71 -
×
3M 19808, Nitrile High Performance Plastic Adhesive 1099, Tan, 5 Oz Tube, 7000000796, 36/case
36 × $21.72 -
×
3M 09099, Scotch-Brite Paint and Rust Stripper Large Area 9099NA, 7010375230
6 × $7.45 -
×
3M 26515, Cloth Belt 341D, P180 X-weight, 6 in x 48 in, Film-lok, Single-flex, 7000118795, 20 per case
20 × $9.13
3M 25491, Outdoor Masking and Stucco Tape 5959, Red, 48 mm x 41.1 m, 12.0 mil,12 Roll/Case, Conveniently Packaged, 7000124742
$24.94
Factory Stock, 7-10 Day Leadtime
Constructed of polyethylene film laminated to cloth with a rubber adhesive, this economical tape resists curling and tears off the roll cleanly for easy application on stucco and other challenging, coated exteriors. 3M Outdoor Masking and Stucco Tape 5959 allows for permanent and temporary applications. It is removable with little or no adhesive residue up to three months after application.
A Tape with Versatility
Originally developed for heating, ventilating and air conditioning (HVAC) applications, duct tape is used today in a variety of maintenance, repair and construction settings. 3M™ Outdoor Masking and Stucco Tape 5959 was tested according to UL723, ASTM E84. Due to its unique design, it is an excellent economical choice for MRO/construction as it performs especially well on a variety of coated exteriors, including stucco. It comes with a smooth, red backing. The tape can be used at temperatures as high as 200°F for up to 30 minutes.
3M™ Outdoor Masking and Stucco Tape 5959 is offered with its red backing to enhance overall visibility and provide easy identifiability. Its sturdy cloth-reinforced tape can be torn from the roll and sticks instantly, providing a wide range of convenient solutions.
Recommended Applications
- Patching
- Bundling
- Reinforcing
- Tabbing
- Taping/splicing insulation
- Capping pipe
- Securing conduit ends
- Marking
- Labeling
- Temporary repair
- Hanging polyethylene drapes
- Protecting against light sandblast overspray
Built to Stick
3M’s family of rugged cloth and duct tapes adheres to most surfaces for applications ranging from bundling to moisture proofing, sealing to splicing, reinforcing to hanging poly drapes. Available in a variety of colors and strengths, they’re known best for their hand tearability, high tensile strength and conformability.
