When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Provides High Shear and Peel Strength and is Toughened for Impact Resistance
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

Insize 4179-8, CYLINDER GAGE BLOCKS FOR DEPTH MICROMETER, 8", 6940561934762
Dynabrade 95216 Pin
Dynabrade 92153 1/2" W x 12" L 80 Grit Ceramic DynaCut Scalloped Edge Belt, 50/pack
Dynabrade 82495 6" Dia. x 400 Grit A/O Vacuum PSA Filmbac DynaCut Disc, 100/Pack
Dynabrade 59380 Rotor/Vane Set
Dynabrade 78006 1/2" W x 12" L Coarse Non-Woven DynaBrite Belts, 10/pack
Dynabrade 90874 2" Dia. Very Fine NWN DynaBrite Locking-Type Disc, 25/pack
Dynabrade 90370 3/4" W x 34" L 120 Grit A/O DynaCut Belt, 50/pack
Dynabrade 90631 3" W x 7-3/8" L 60 Grit A/Z DynaCut Belt, 10/ Pack
Dynabrade 94467 DynaJet In-Line Blow Gun
Dynabrade 59339 Vacuum Cuff, 1", w/Groove
Dynabrade 92116 1/2" W x 12" L 320 Grit A/O DynaCut Belt, 50/pack
Dynabrade 90226 1/4" W x 18" L 320 Grit A/O DynaCut Belt, 50/pack 
