-
×
3M 28763, Cubitron II Cut and Grind Wheel, Type 27 Quick Change, 5 in x 1/8 in x 5/8"-11, 7100018883, 20 per case
20 × $12.17 -
×
Dynabrade 51703 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 1/8" Collet
1 × $558.00 -
×
Insize 7260-250, SPRING DIVIDER, 10", 6928640319723
1 × $24.17 -
×
3M 87103, Cloth Belt 341D, 24 X-weight, 9 in x 20 in, Fabri-lok, Single-flex, 7010326200, 20 per case
20 × $18.86 -
×
3M 99298, Scotch-Weld Structural Plastic Adhesive DP8005, Black, 490 mLDuo-Pak, 7100089476, 6/case
6 × $317.12 -
×
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $1,025.00 -
×
Standard Abrasives 32985, Aluminum Oxide Overlap Disc, 714721, 60 Grit, 2 in x 8-32 x 2 Ply, 7100116380
100 × $1.67 -
×
Dynabrade 55501 .1hp Pencil Grinder, Twin Turbine, 100,000 RPM, Nickel-Plated Aluminum Housing, 3mm Collet
1 × $529.55 -
×
Dynabrade 51633 .1 hp Straight-Line Extension Pencil Grinder, Central Vacuum, 1/8" Collet
1 × $634.00 -
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.98 -
×
Dynabrade 51630 .1 hp Straight-Line Extension Pencil Grinder, Central Vacuum, 1/8" Collet
1 × $634.00 -
×
3M 41531, Scotch-Weld Epoxy Adhesive 420, Black, Part B, 5 Gallon Drum (Pail), 7000000827
5 × $583.75 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $9.52 -
×
Dynabrade 51708 .1 hp Straight-Line Pencil Grinder, 35,000 RPM, 3/32" Collet
1 × $558.00 -
×
3M 16028, PPS Lid & Liner Kit, Micro (3 fl oz), 200 Micron Full
Diameter Filter, 50 Lids & Liners per kit, 7000045465
1 × $94.69 -
×
3M 16578, Accuspray ONE Spray Gun Kit, 7100096182
4 × $363.88 -
×
3M 09099, Scotch-Brite Paint and Rust Stripper Large Area 9099NA, 7010375230
6 × $7.45 -
×
Dynabrade 51629 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 1/8" Collet
1 × $603.00
3M 07591, Outdoor Masking Poly Tape 5903, Red, 5 in x 60 yd, 7.5 mil, 7010334725
$52.68
Factory Stock, 7-10 Day Leadtime
Constructed of polyethylene film with a synthetic rubber adhesive, 3M Outdoor Masking Poly Tape resists curling and tears off the roll cleanly for easy application on stucco and other challenging, coated exteriors. This economical tape was constructed to allow for permanent and temporary applications. It is removable with little or no adhesive residue up to one month after application.
Perfectly Suited for Stucco
Our 3M™ Outdoor Masking Poly Tape 5903 is a multipurpose tape that has proven to work especially well when applied to stucco and other coated exteriors. It is a tape that is sturdy yet removes cleanly to preserve the quality and look of finished work. 3M™ Outdoor Masking Poly Tape 5903 can be used in a variety of masking, patching, bundling and labeling jobs. It removes cleanly from most opaque surfaces up to one month – an important feature that can improve the quality and aesthetic appeal of your finished jobs. Additionally, this UV resistant tape has a conformable backing, adding to its versatility in a range of applications.
Recommended Applications
- Outdoor masking for stucco
- Protecting window and door frames during construction
- Masking sealed masonry or brick
- Patching
- Bundling
- Reinforcing
- Taping/splicing insulation
- Securing conduit ends
- Marking
- Labeling
- Temporary repair
- Hanging polyethylene drapes
What is Masking Tape?
Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. Masking tapes from 3M adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application.
