-
×
3M 04297 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Very Fine, 2 in x 132 in, 7010365859
5 × $56.35 -
×
Standard Abrasives 713159, Aluminum Oxide Handy Roll, P120 J-weight, 1-1/2 in x 50 yd, 7010290409
1 × $41.26 -
×
3M 14502 Scotch-Brite Surface Conditioning Belt, 3/8 in x 13 in, A MED, 7100103026
20 × $3.92 -
×
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
1 × $915.00 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $28,988.00 -
×
ACS Diamond Cloth Belt, CX1250 3" X 30" 60M/250U
2 × $61.65 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
2 × $1,012.00 -
×
3M 13372, Scotch-Brite Star, 3 in A CRS LS, 7000120967
50 × $7.43 -
×
3M 19770, Utility Cloth Sheet 314D, 9 in x 11 in P120 J-weight, 7000000358
250 × $1.57 -
×
3M 45710, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 6 in x NH, Die 600Z, 7100113139
200 × $2.78 -
×
Standard Abrasives 725008, Buff and Blend Cross Buff HP, A/O Very Fine, 1 in x 3/8 in x 2 Ply x 8-32, 7000046829
50 × $3.44 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,712.00 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
Standard Abrasives 725006, Buff and Blend Cross Buff HP, A/O VFN, 1-1/2 in x 1/2 in x 3 Ply x 8-32, 7000046827
50 × $7.00 -
×
Standard Abrasives 727398, Buff and Blend Cross Buff HS, A/O Coarse, 2 in x 3/4 in x 2 Ply x 1/4-20, 7010369357
25 × $7.71 -
×
ACS Flap Disc, Type 29 (Curved) Full Diamond 4-1/2 X 5/8-11 60M, 333.FD4.5-60/T29
1 × $52.00 -
×
Norton 66254497067 - 2" X 1/4" 100 - 150 Grit Medium Grade Aluminum Oxide Vortex Rapid Blend Blue TR Non-Woven Abrasive Disc, 25 Each
25 × $4.53 -
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.98 -
×
Standard Abrasives 37446, PSA A/O Disc, 700595, 1-1/2 in x NH, 60, 7010331822
100 × $0.24
3M 07591, Outdoor Masking Poly Tape 5903, Red, 5 in x 60 yd, 7.5 mil, 7010334725
$55.84
Factory Stock, 7-10 Day Leadtime
Constructed of polyethylene film with a synthetic rubber adhesive, 3M Outdoor Masking Poly Tape resists curling and tears off the roll cleanly for easy application on stucco and other challenging, coated exteriors. This economical tape was constructed to allow for permanent and temporary applications. It is removable with little or no adhesive residue up to one month after application.
Perfectly Suited for Stucco
Our 3M™ Outdoor Masking Poly Tape 5903 is a multipurpose tape that has proven to work especially well when applied to stucco and other coated exteriors. It is a tape that is sturdy yet removes cleanly to preserve the quality and look of finished work. 3M™ Outdoor Masking Poly Tape 5903 can be used in a variety of masking, patching, bundling and labeling jobs. It removes cleanly from most opaque surfaces up to one month – an important feature that can improve the quality and aesthetic appeal of your finished jobs. Additionally, this UV resistant tape has a conformable backing, adding to its versatility in a range of applications.
Recommended Applications
- Outdoor masking for stucco
- Protecting window and door frames during construction
- Masking sealed masonry or brick
- Patching
- Bundling
- Reinforcing
- Taping/splicing insulation
- Securing conduit ends
- Marking
- Labeling
- Temporary repair
- Hanging polyethylene drapes
What is Masking Tape?
Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. Masking tapes from 3M adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application.
