-
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
1000 × $0.67 -
×
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
1 × $274.26 -
×
3M 94702, Cubitron ll Cloth Belt 947A, 120+ X-weight, 1/4 in x 24 in, Fabri-lok, Single-flex, 7100141686, 200 per case
200 × $2.14 -
×
3M 06728, Premium Plastic Sheeting with 233+ Masking Tape (36 mm), 16
ft x 400 ft, 7100139893
1 × $87.14 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 9u
12 × $7.60 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $453.00 -
×
3M 16301, PPS Lid & Liner Kit, Standard (22 fl oz), 125 Micron Full
Diameter Filter, 50 Lids & Liners per kit, 7010029842
1 × $147.10 -
×
3M 20927, PSA Cloth Disc 348D, P240 X-weight, 1 in x NH, Die 100N, 7000118918
500 × $0.39 -
×
3M 80176, Cloth Belt 777F, 50 YF-weight, 6 in x 48 in, Film-lok, Single-flex, 7010307734, 20 per case
20 × $34.29 -
×
3M 22971, Disc Holder Adapter 9, 5/8-11 External M10-1.25 Internal, 7000046094
10 × $13.80 -
×
Standard Abrasives 715081, A/O Straight Cartridge Roll, 5/8 in x 2 in x 3/16 in 60, 7100102991
50 × $0.92 -
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
1 × $734.00 -
×
3M 81920, Hookit Microfinishing Film Disc 268L, 30 Mic, Type D, 5 in x NH, Die 500X, 7000118204, 500 ea/Case
500 × $1.24 -
×
3M 62610, Scotch-Weld Threadlocker TL62, Red, 50 mL Bottle, 7100039196, 10/case
10 × $36.70 -
×
3M 20908, PSA Cloth Disc 348D, P100 X-weight, 2 in x NH, Die 200P, 7000118874
200 × $0.74 -
×
3M 19764, Utility Cloth Sheet 314D, 9 in x 11 in P320 J-weight, 7000000352
250 × $1.37 -
×
3M 21463, Marine Adhesive Sealant 5200, White, 5 Gallon Drum (Pail), 7010325698
1 × $1,029.08 -
×
3M 26481, 641WY, 3" X 30", 100 Mesh, Diamond Cloth Belts, 7010508917
1 × $142.63
3M 31180, Platinum Plus Glaze, 30 fl oz, 7000045509
$55.84
Factory Stock, 7-10 Day Leadtime
3M Platinum Plus Glaze is two-part premium selfleveling finishing glaze that can repair minor imperfections on properly prepared substrates such as galvanized steel, steel, aluminum, fiberglass, wood, SMC, E-coat, OEM topcoats, cured/sanded epoxy and urethane primers. This finishing glaze cuts the sanding time to as little as 15 minutes.
Make Your Car Look New Again by Covering Minor Blemishes
3M™ Platinum Plus Glaze can repair minor imperfections such as scratches, pinholes and door dings. This polyester finishing glaze can be used as a finish coat over body filler to fill pinholes and low filled areas. It may be applied on properly prepared steel, aluminum, galvanized, SMC, fiberglass and OEM paint surfaces. 3M™ Platinum Plus Glaze may also be used for industrial and architectural surfaces needing minor surface repairs.
Related products
