-
×
3M 64926, Scotch-Brite Hand Pad 7447 PRO, PO-HP, A/O Very Fine, 6 in x 9 in, 7100023339, 20/Carton
3 × $31.35 -
×
3M 77408, Cloth Belt 777F, 50 YF-weight, 1/2 in x 24 in, Fabri-lok, Single-flex, 7000118438, 200 per case
200 × $2.66 -
×
3M 05442, Stikit Soft Hand Block, 2-3/4 x 5 in, 7000045435
10 × $31.85 -
×
3M 16023, PPS Cup & Collar, Large, 7000000642
4 × $29.87 -
×
Standard Abrasives 712230, Cartridge Roll Mandrel, 1/8 in x 2 in x 1/4 in x 1-1/4 in x 4 in CM-11, 7000121797
5 × $5.86 -
×
3M 07414, Hand Sanding Metal Finishing Pad 7414NA, 4.375 in x 11 in, Maroon Medium, 7010315820
10 × $1.87 -
×
3M 85563, Heavy Duty Duct Tape 3939, Silver, 96 mm x 54.8 m, 9.0 mil, 7100022015
12 × $38.08 -
×
3M 19766, Utility Cloth Sheet 314D, 9 in x 11 in P240 J-weight, 7000000354
50 × $1.57 -
×
3M 05444, Stikit Hand File Board, 2-3/4 in x 16 in, 7000045763
1 × $82.91 -
×
3M 07415, Hand Sanding Wood Finishing Pad 7415NA, 4.375 in x 11 in, Gray Fine, 7010383728
10 × $1.87 -
×
3M 66617, Cloth Belt 341D, 50 X-weight, 3 in x 24 in, Fabri-lok, Single-flex, 7000118857, 25 per case
25 × $3.77 -
×
3M 26122, PPS Series 2.0 Cup, Midi (13.5 fl oz, 400 mL), 7100135960, 2 per carton
4 × $18.15 -
×
Standard Abrasives 547003, Adapter, 5/8"-11 Male x 3/8"-24 Female, 7010368726
1 × $10.22 -
×
3M 36864, Dirt Trap Material Floor Dispenser, 56 in, 7000119908
1 × $873.93 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.66 -
×
3M 76523, Cloth Belt 777F, 50 YF-weight, 2 in x 72 in, Film-lok, Single-flex, 7000118456, 50 per case
50 × $16.15 -
×
3M 85391, Cloth Belt 963G, 50 YN-weight, 2 in x 72 in, Film-lok, L-flex, 7010299930, 50 per case
50 × $10.42
3M 09313, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, P80 Grit, 7010314926
$165.73
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
