-
×
Dynabrade 56106 5" Dia. Non-Vacuum Disc Pad, Vinyl-Face
2 × $24.59 -
×
Dynabrade 90444 1" W x 30" L Coarse NWN DynaBrite Premium Belt, 10/pack
10 × $18.45 -
×
Norton 66254497067 - 2" X 1/4" 100 - 150 Grit Medium Grade Aluminum Oxide Vortex Rapid Blend Blue TR Non-Woven Abrasive Disc, 25 Each
25 × $4.53 -
×
Dynabrade 55523 .3 hp Straight-Line, 6" Extended Die Grinder, Aluminum Housing 25,000 RPM, Rear Exhaust, 1/4" Collet
2 × $853.00 -
×
3M 60230, Scotch-Brite Hookit Cut and Polish Disc, CP-HA, A/O Medium, 5 in x NH, 7000121099
40 × $4.57 -
×
Dynabrade 90373 2" W x 34" L Medium NWN DynaBrite Premium Belt, 10/pack
10 × $39.34 -
×
3M 27709, Cubitron II Roloc Durable Edge Disc 984F, 60+, YF-weight, TR, Maroon, 2 in, Die R200P, 7100001475, 200 per case
400 × $1.48 -
×
Insize 7210-2, MULTIPLEX INTERFACE BOXES, 6974029778575
1 × $697.51 -
×
Insize 7351-1EX22, LONG HANDLE, length 38.5" , 6928640357282
1 × $255.61
-
×
Standard Abrasives 33346 Surface Conditioning RC Belt 888056, 3/4 in x 18 in, CRS,7000121948
10 × $8.42 -
×
3M 15899 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 3/4 in x 18 in, 7000028461
20 × $10.21 -
×
Standard Abrasives 710335, A/O Straight Cartridge Roll, 1/4 in x 1 in x 1/8 in 60, 7100080015
100 × $0.34 -
×
3M 17534 Scotch-Brite Surface Conditioning Low Stretch Belt, SC-BL, A/O Medium, 2-1/2 in x 60 in, 7010366042
10 × $48.48 -
×
Dynabrade 90406 1/2" W x 30" L Very Fine NWN DynaBrite Premium Belt, 10/pack
10 × $10.06 -
×
Dynabrade 01494 Air Inlet Bushing
1 × $14.81 -
×
Norton 66623303912 - 2" Dia. XCS Grit Aluminum Oxide Type III, Bear-Tex Non-Woven Quick-Change Disc, 25 Each
25 × $6.83
3M 09313, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, P80 Grit, 7010314926
$156.35
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
