When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Delivers Non-sag Formulation so Adhesive Stays Where Applied
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3Mâ„¢ Scotch-Weldâ„¢ Low Odor Acrylic Adhesive DP810NS. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

Standard Abrasives 36449 Surface Conditioning FE Belt 885031, 3-1/2 x 15-1/2 in MED, 7000122074
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
3M 54109, Scotch-Brite Roloc AL Surface Conditioning Disc TR, 1-1/2 in x NH A MED, 7100075533, 200 per case
Norton 66261014792 - 2" Medium Grade Aluminum Oxide Bear-Tex Speed-Lok High Strength Maroon TR Non-Woven Abrasive Disc 160 Each
Standard Abrasives 32533 Surface Conditioning RC Belt 888052, 1/2 in x 24 in MED, 7000121665
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
Standard Abrasives 546007, Quick Change Disc Pad, TR, 2 in, MED, 7100092834
Standard Abrasives 36388 Surface Conditioning RC Belt 888082, 1/2 in x 12 in, MED, 7010368566
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
3M 54136, Scotch-Brite Roloc AL Surface Conditioning Disc TR, 2 in x NH A MED, 7100075707, 200 per case
3M Super Abrasives Roloc Disc, 2" Type-R, Medium AO High Strength, Box of 50
Dynabrade 90873 2" Dia. Medium NWN DynaBrite Locking-Type Disc, 25/pack
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
3M 02960, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1 in x 1 in, 7100009186, Box of 3
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
Dynabrade 91640 2" W x 36" L 180 Grit A/O DynaCut Belt, 10/pack
3M 02690, Plastic Bonding Adhesive 2665B, Black, 30 cc syringe, 7100111531, 24/case
Insize ISY-100-1402, CLIP STAND, 2PCS, 6940561936223
Dynabrade 14000 Dynafile Abrasive Belt Tool
Dynabrade 95544 Gear Grease, 2.5oz. Tube
3M 65033, Scotch-Brite Diamond Wheel, 645DC 6 in x 1/2 in x 1 in, 7010365574, Box of 3 
