-
×
3M 80770, Cloth Spiral Band 747D, 051144-80770-3, 3;2661869, 1 in x 1 in, 60 X-weight, 7100138165
100 × $1.04 -
×
3M 76751, Roloc Disc 777F, 60 YF-weight, TS, 3 in, Die RS300V, 7010363900
200 × $1.43 -
×
3M 26139, PPS Series 2.0 Adapter, Type S43, 1/4 Male, 19 Thread BSP, 7100135337
4 × $25.96 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
Dynabrade 78490 4" Dia. x 1", 1/4-20 Female Center Thread, A/O, 80 Grit, 8-Ply J-DynaCut Cross Pad, 100/pack
100 × $4.09 -
×
ACS Diamond Cloth Belt, CX1250 3" X 90" 75U
2 × $171.30 -
×
ACS Diamond Cloth Belt, CX1250 1" X 64" 125U
12 × $40.60
-
×
3M 21750, Stikit Cloth Disc Roll 341D, 1697433, 80 X-weight, 5 in x NH, Die 500X, 7000118783
400 × $108.16 -
×
3M 70884, Sanding Belt, 9262NA-2, 3 in x 18 in, Coarse, 50 grit, 7010291277, 2 per pack, 10 packs per case
10 × $2.14 -
×
3M 21749, Stikit Cloth Disc Roll 341D, P100 X-weight, 5 in x NH, Die 500X, 7000118782
400 × $102.68 -
×
3M 57894, 642WY 1/4" X 24", 50000 Mesh Diamond Cloth Belt, 7100230570
15 × $0.00 -
×
3M 45707, Cubitron II Hookit Cloth Disc 947A, 40+ X-weight, 6 in x NH, Die 600Z, 7100113121
200 × $4.29 -
×
3M 45701, Cubitron II Hookit Cloth Disc 947A, 80+ X-weight, 3 in x NH, Die 300V, 7100113126
400 × $0.97 -
×
Norton 66254432925 Wheel, 3" X 1/2" X 1/4" Bear-Tex, Rapid Blend, Non-Woven 5 Density, A/O, M Grit, 20 Each
20 × $17.78 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
Standard Abrasives 863110, A/O Unitized Wheel, 631, 2 in x 1/4 in x 1/4 in, 7000144629
10 × $5.31 -
×
3M 45709, Cubitron II Hookit Cloth Disc 947A, 80+ X-weight, 6 in x NH, Die 600Z, 7100113080
200 × $2.81 -
×
3M 19706, Scotch-Brite EXL Unitized Wheel, XL-UW, 2S Fine, 6 in x 1/4 in x 1 in, SPR 17773A, 7010366223
8 × $28.15 -
×
3M 45705, Cubitron II Hookit Cloth Disc 947A, 80+ X-weight, 5 in x NH, Die 500X, 7100112980
200 × $2.02 -
×
3M 56038, Hookit Microfinishing Film Disc 268L, 30 Mic, Type D, 3 in x 7/8 in, Die 300M, 7000000297, 100/Case
100 × $0.51 -
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
1 × $734.00 -
×
3M 27781, Stikit Paper Disc Roll 426U, 240 A-weight, 5 in x NH, Die 500X, 7100132652, 175 discs per roll
6 × $69.35 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $25.78 -
×
Dynabrade 56107T 6" Non-Vac Pad, Teal
1 × $25.19 -
×
3M 01418, Stikit Gold Paper Disc Roll 216U, 5 in x NH P360 A-weight, 7100057404, 175 discs per roll
6 × $100.99 -
×
3M 01624, Stikit Gold Paper Disc Roll 216U, P180 A-weight, 5 in x NH, D/F 5HL, Die 500FH, 7100057403, 175 discs per roll
6 × $101.01 -
×
Norton 66623325038 - 3" 120 Grit Fine Grade Aluminum Oxide Vortex Rapid Prep, TR (Type III) Non-Woven Surface Preparation Disc, 25 Each
25 × $3.41 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
Norton 66261017522 - 3" Medium Grade Rapid Prep TR (Type III) Non-Woven Surface Preparation Disc, 25 Each
25 × $2.65 -
×
Dynabrade 90875 2" Dia. Super Fine NWN DynaBrite Locking-Type Disc, 25/pack
25 × $43.25
3M 04002, Scotch-Brite High Strength Disc, HS-DC, A/O Medium, 12 in x 1-1/4 in, 7100078403
$19.24
Factory Stock, 7-10 Day Leadtime
Scotch-Brite High Strength Disc is a general purpose disc made of a durable, tough web and is designed to effectively clean, deburr, denib/defuzz, and achieve satin finishes. The durable, non-woven, open-web construction resists loading and runs cool to keep the abrasives cutting at a consistent rate throughout the life of the disc.
Conformability allows the Scotch-Brite High Strength Disc to work well on irregular surfaces and into tight areas without damaging the base material. This disc may be used individually or stacked on a straight shaft tool or bench motor to condition larger areas, bar grates, louvers, vents, and tracks.
Scotch-Brite is a unique surface conditioning product with abrasives incorporated into non-woven nylon fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the nylon fibers.
Related products
