-
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.66 -
×
3M 33177, Scotch-Brite Radial Bristle Brush Replacement Disc T-S 120 Refill, 8 in, 7100038608, 70/Pack
1 × $763.72 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.77 -
×
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 250U
12 × $6.15 -
×
Standard Abrasives 717078, Cartridge Roll Mandrel, 3/32 in x 3/4 in x 1/4 in x 1 in x 2-3/4 in CM-2E, 7000121813
5 × $5.36 -
×
3M 26585, Accuspray Atomizing Head Refill Pack for 3M PPS Series 2.0,Clear, 1.8 mm, 7100152955
5 × $6.63 -
×
ACS Flap Disc, Type 29 (Curved) Full Diamond 4-1/2 X 5/8-11 60M, 333.FD4.5-60/T29
1 × $52.00 -
×
3M 33180, Scotch-Brite Radial Bristle Brush Replacement Disc, T-C 220 Refill, 7-5/8 in, 7100138341, 70/Pack
1 × $763.72 -
×
Standard Abrasives 36449 Surface Conditioning FE Belt 885031, 3-1/2 x 15-1/2 in MED, 7000122074
10 × $27.55 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.95 -
×
3M 07486, Scotch-Brite Roloc Surface Conditioning Disc, TR 07486, 3 in x NH A MED, 7000046113, 25 per box, 4 boxes per case
4 × $81.52 -
×
ACS Diamond Cloth Belt, CX1250 1/2" X 72" 125U
12 × $23.20
-
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $10.47 -
×
3M 02590, Stikit Gold Sheet Roll, P400, 2-3/4 in x 45 yd, 7000028254
10 × $68.91 -
×
ACS Diamond Cloth Belt, CX1250 5/8" X 120" 125U
9 × $47.60
-
×
3M 86992, Diamond Disc, 3" Roloc, 674W, 120 Mesh, TR, 7100143477, Box of 5
1 × $59.95 -
×
3M 13880, Wetordry Paper Disc 431Q, 320 C-weight, 12 in x NH, Die 1200B, 7010328268
100 × $3.85 -
×
ACS Diamond Cloth Belt, CX1250 3" X 30" 125U
2 × $57.10
3M 71346, 675L, 1″ X 120″, 125u, Diamond Microfinishing Film Belts, 7010534823
$103.76
- Micron-graded diamond mineral delivers close tolerance precision finishes
- Great for medium stock removal
- Polyester film backing allows belt to be used dry or wet with water or oil-based lubricants
- An exceptional film for thermal spray finishing of contour / complex shapes
- Color coded to reduce the risk of error and mixing up abrasive grades
Designed with a strong polyester film backing and sharp diamond mineral, the 3M™ Diamond Microfinishing Film Belt 675L delivers fine finishes on hard metals like thermal spray coating, ceramics, carbides, chilled iron and granite.
High-quality Materials for Micro-finishing
3M™ Diamond Microfinishing Film Belt 675L securely anchors micron-graded diamonds to a polyester film backing. Polyester film backings are water resistant, so the abrasive may be run with a water or oil-based lubricant, which helps wash away unwanted swarf and debris and keeps the abrasive running cool. The belts are also color coded by grade to help you reduce the risk of selecting the wrong grade.
Tips for Achieving Desired Roughness Average
Many Micro-finished products require a specific Ra, or roughness average, when applying to thermal spray coatings, carbides, ceramics, exotic alloys, or other composites. It is important for operators to consider these factors – Ra and substrate – when selecting the grade of film for this belt.
Related products
