-
×
ACS Flap Disc, Type 29 (Curved) Full Diamond 4-1/2 X 5/8-11 60M, 333.FD4.5-60/T29
1 × $52.00 -
×
3M 07414, Hand Sanding Metal Finishing Pad 7414NA, 4.375 in x 11 in, Maroon Medium, 7010315820
10 × $1.87 -
×
3M 33179, Scotch-Brite Radial Bristle Brush Replacement Disc, T-C 120 Refill, 7-5/8 in, 7100138304
1 × $763.72 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $9.21 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $10.47 -
×
3M 15913, Scotch-Brite Roloc Disc High Strength, TR, 2 in X NH A Medium, 7000000710
200 × $1.96 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.54 -
×
3M 86745, Diamond Disc, 2" Roloc, 674W, 120 Mesh, TR, 7100022116, Box of 10
10 × $26.65 -
×
Standard Abrasives 708751, PSA A/O Disc, 12 in x NH, 60, 7010370081
10 × $5.83 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.55 -
×
3M 49941, Roloc Disc 361F, 80 YF-weight, TSM, 3 in, Die RS300VM, 7000148151
200 × $1.46 -
×
3M 09092, Dry Layup Adhesive 1.0, 18.93 Liter, Red, 7000044933
1 × $987.01 -
×
3M 05741, Hookit Hand Block, 2-3/4 in x 7-3/4 in, 7000045716
10 × $40.72 -
×
3M 05444, Stikit Hand File Board, 2-3/4 in x 16 in, 7000045763
1 × $82.91 -
×
3M 17298, Cubitron ll Cloth Belt 784F, 60+ YF-weight, 1/2 in x 12 in, Fabri-lok, Single-flex, 7010532459, 200 per case
200 × $2.41 -
×
ACS Diamond Cloth Belt, CX1250 3" X 90" 75U
2 × $171.30
3M 71346, 675L, 1″ X 120″, 125u, Diamond Microfinishing Film Belts, 7010534823
$103.76
- Micron-graded diamond mineral delivers close tolerance precision finishes
- Great for medium stock removal
- Polyester film backing allows belt to be used dry or wet with water or oil-based lubricants
- An exceptional film for thermal spray finishing of contour / complex shapes
- Color coded to reduce the risk of error and mixing up abrasive grades
Designed with a strong polyester film backing and sharp diamond mineral, the 3M™ Diamond Microfinishing Film Belt 675L delivers fine finishes on hard metals like thermal spray coating, ceramics, carbides, chilled iron and granite.
High-quality Materials for Micro-finishing
3M™ Diamond Microfinishing Film Belt 675L securely anchors micron-graded diamonds to a polyester film backing. Polyester film backings are water resistant, so the abrasive may be run with a water or oil-based lubricant, which helps wash away unwanted swarf and debris and keeps the abrasive running cool. The belts are also color coded by grade to help you reduce the risk of selecting the wrong grade.
Tips for Achieving Desired Roughness Average
Many Micro-finished products require a specific Ra, or roughness average, when applying to thermal spray coatings, carbides, ceramics, exotic alloys, or other composites. It is important for operators to consider these factors – Ra and substrate – when selecting the grade of film for this belt.
Related products
