-
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $453.00 -
×
3M 13172, Scotch-Brite Multi-Finishing Wheel, MU-WL, 2S Fine, 6 in x 1 in x 1 in, 7000136471
3 × $50.65 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $28,988.00 -
×
3M 09099, Scotch-Brite Paint and Rust Stripper Large Area 9099NA, 7010375230
6 × $7.45 -
×
Standard Abrasives 863299, Quick Change TR S/C Unitized Wheel, 632, 2 in x 1/4 in, 7010330149
10 × $5.73 -
×
3M 28120, Hookit Clean Sanding Disc 900DZ, 5 in 60 J-weight, Die 500LG, 7010326613
250 × $1.51 -
×
3M 29860, Sanding Screen, 120 grit, 12 in x 18 in, 7100160860
20 × $5.05 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67 -
×
Dynabrade 51703 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 1/8" Collet
1 × $558.00 -
×
Insize 7341-5S, PIN GAGE HANDLE (with 1pc handle and 6 pairs of collecting bushes), .228-281", 6928640370618
1 × $39.77 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
Dynabrade 51812 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 3/32" Collet
1 × $751.00 -
×
3M 14345, Marine Adhesive Sealant 4000 UV, Black, 3 oz Tube, 7010367954, 6/Case
6 × $15.34 -
×
ACS 1/2 in x 18 in Diamond Metal Bond Belt, 60M/250u
1 × $30.00 -
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3 × $43.00 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $9.52 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $388.51 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 125u
12 × $7.60 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.58 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50
Standard Abrasives 541152, Quick Change TS P.A.R.T. #30 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121724
$25.05
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Quick Change P.A.R.T. Disc Mandrel secures the Standard Abrasives Quick Change P.A.R.T. Disc to a rotary tool with a 5/8-inch collet assembly. These P.A.R.T. (Paint Anodized Removal Tool) Discs are used to clean and prep painted or corroded surfaces around holes prior to re-riveting or connecting a ground wire.
About the Quick Change P.A.R.T. Disc
The Standard Abrasives Quick Change P.A.R.T. Disc Mandrel is designed specifically for use with our Standard Abrasives Quick Change P.A.R.T. Discs. These discs are used to remove surface contaminants, paint or primer at electrical grounding contact points. The disc’s center hole diameter self-aligns so it will only clean the workpiece hole and maintain the anodized layer surrounding it. Plus, they’re available in a range of grades and sizes for your specific application.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
