-
×
3M 05182, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1/2 in x 1 in, 7100050403,Box of 4
1 × $94.50 -
×
3M 05043, Cloth Belt 384F, 80+ XF-weight, 1/2 in x 12 in, Fabri-lok, Full-flex, 7100141435, 200 per case
200 × $1.15 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
2 × $9.18 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
Dynabrade 90211 1/8" W x 18" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $1.10 -
×
3M 27008, 642WY, 3" X 30", 50000 Mesh, Diamond Cloth Belts, 7010533172
1 × $147.65 -
×
3M 37019, Versaflo Air Regulating Valve Assembly V-300/37019(AAD), 7100077491, 1 EA/Case
1 × $224.35 -
×
3M 87140, Hookit Wetordry Paper Disc 401Q, 2000 A-weight, 5 in x NH, Die 500X, 7010363499
250 × $1.40 -
×
3M 55723, Stikit Film Disc 375L, 6 x NH P1200 w/Skipslit Liner, 7100075241, 250 per case
250 × $0.76 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
3M 80298, Two-Handled Textured Surface Applicator TSA-4, Large Area Roller, 1Ea/Case, 7000005261
1 × $500.85 -
×
Insize 7341-5S, PIN GAGE HANDLE (with 1pc handle and 6 pairs of collecting bushes), .228-281", 6928640370618
1 × $39.77
-
×
ACS CX1250 Diamond Belt, 1/2" X 24" 125u
12 × $7.60 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67
Standard Abrasives 522320, Quick Change Silicon Carbide 2 Ply Disc, 120, TSM, Black, 1-1/2 in, Die QS150SM, 7010310650, 50/case
$0.49
Choose a Standard Abrasive Quick Change Silicon Carbide 2-Ply Disc to quickly grind, deburr, blend and finish non-ferrous metals, stainless steel and composites. The 2-ply backing provides added stiffness and disc life for low to medium-pressure applications while yielding to accommodate both flat and contoured surfaces.
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is a good choice for finishing smaller surface areas of non-ferrous metals such as aluminum or titanium, as well as stainless steel, fiberglass, plastic, and glass. Coarser grits are typically used for grinding, deburring and blending applications on these substrates.
Quick Change Convenience
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is available in a range of sizes, coarse grits and quick change sanding systems. Quick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications.
Choose the disc compatible with your TP, TR, TS or TSM holder pad. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded hub that easily mounts to TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS and TSM systems feature a metal hub that securely attaches to its holder pad with a simple twist.
Sharp, Fast Cut and Fine Finish
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.
For a more aggressive application, choose our Quick Change Silicon Carbide 3-Ply Disc (sold separately). The versatile portfolio of Standard Abrasives™ Quick Change Discs helps to ensure that operators will find a disc that is well-suited to their project needs and applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
