-
×
3M 31219, 675L, 1/2" X 72", 30u, Diamond Microfinishing Film Belt 7010508920
1 × $0.00 -
×
Standard Abrasives 713159, Aluminum Oxide Handy Roll, P120 J-weight, 1-1/2 in x 50 yd, 7010290409
1 × $41.26 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
2 × $1,585.00 -
×
3M 19764, Utility Cloth Sheet 314D, 9 in x 11 in P320 J-weight, 7000000352
250 × $1.57 -
×
3M Super Abrasives Roloc Disc, 2" Type-R, Medium AO High Strength, Box of 50
1 × $95.00 -
×
3M 20967, Portable Utility Cloth Roll 314D, P240 J-weight, 1 in x 20 yd, 7010290604
5 × $17.83 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $36.81 -
×
3M 05182, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1/2 in x 1 in, 7100050403,Box of 4
1 × $103.88 -
×
3M 05027, Utility Cloth Roll 211K, 150 J-weight, 1-1/2 in x 50 yd, Full-flex, 7100031693
5 × $90.19 -
×
Standard Abrasives 713296, Aluminum Oxide Handy Roll, P320 J-weight, 2 in x 50 yd, 7100034517
1 × $52.38 -
×
3M 35124, Grippy Sanding Cloth Trial Kit, 7100230957
10 × $6.84 -
×
3M 19769, Utility Cloth Sheet 314D, 9 in x 11 in P150 J-weight, 7000000357
250 × $1.57 -
×
3M 19773, Utility Cloth Sheet 314D, 9 in x 11 in P60 X-weight, 7000000360
50 × $1.99 -
×
Standard Abrasives 725011, Buff and Blend Cross Buff HP, A/O VFN, 3/4 in x 3/8 in x 2 Ply x 8-32, 7000047134
50 × $4.12 -
×
3M 19770, Utility Cloth Sheet 314D, 9 in x 11 in P120 J-weight, 7000000358
250 × $1.57 -
×
Dynabrade 57800 3-2/3" W x 7" L Dynabug Orbital Sander, Non-Vacuum, .24 HP, 8,000 RPM, 3/16" Orbit
1 × $558.00 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $12.14 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.66 -
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
1 × $1,520.00 -
×
ACS Diamond Grinding Disc, 4-1/2" Dia. X 5/8"-11 Center Hub Thread, Type 29, 36 Grit
2 × $40.00 -
×
3M 19795, Utility Cloth Roll 314D, P400 J-weight, 1-1/2 in x 20 yd, 7100081717
5 × $47.61 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,679.00 -
×
3M 09548, Scotch-Brite EXL Deburring Wheel, XL-WL, 8S Fine, 6 in x 1/2 in x 1 in, 7000136514
4 × $65.24 -
×
3M 69436, Cloth Belt 577F, 120 YF-weight, 1/2 in x 24 in, Fabri-lok, Single-flex, 7000119456, 200 per case
200 × $1.73 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
Standard Abrasives 712149, Aluminum Oxide Handy Roll, P100 J-weight, 1-1/2 in x 50 yd, 7010295370
1 × $41.26 -
×
Dynabrade 78098 2" Dia. x 36 Grit A/Z DynaCut Locking-Type Disc, 2 Ply Cloth, 25/pack
25 × $2.12
3M 76746, Roloc Disc 777F, 50 YF-weight, TS, 2 in, Die RS200P, 7010363894
$1.30
Factory Stock, 7-10 Day Leadtime
3M Roloc Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Our 3M Roloc Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.
3M Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M Roloc Disc 777F products feature aluminum oxide mineral blended with 3M Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.
3M Roloc Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system.
