-
×
3M 76624, Roloc Disc 777F, 60 YF-weight, TR, 1 in, Die R100N, 7000045620
500 × $0.62 -
×
Standard Abrasives 710190, Cartridge Roll Mandrel, 2560020, 1/8 in x 1 in x 1/4 in x 1-1/4 in x 2-3/4 in CM-9, 7000121790
5 × $4.17 -
×
3M 80205, Microfinishing PSA Film Disc 268L, 100 Mic, Type D, Black, 5 in x NH, Die 500X, 7010325496, 500 per case
500 × $1.15 -
×
Standard Abrasives 713296, Aluminum Oxide Handy Roll, P320 J-weight, 2 in x 50 yd, 7100034517
1 × $47.66 -
×
Dynabrade 51705 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 3/32" Collet
1 × $558.00 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $9.52 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
3M 77408, Cloth Belt 777F, 50 YF-weight, 1/2 in x 24 in, Fabri-lok, Single-flex, 7000118438, 200 per case
200 × $2.66 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74 -
×
3M 28719, Wheel Adapter Kit 28719, 1 in x 5/8-11 Internal, 7100050705
1 × $50.70 -
×
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
1 × $129.94 -
×
3M 87147, PSA Cloth Disc 777F, 5 x NH, 36 YF-weightt, 7010308524
250 × $3.18 -
×
3M 26583, Accuspray Refill Pack for PPS Series 2.0, Green, 1.3 mm, 7100152953
5 × $10.20 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 175u
12 × $7.60 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
3M 35519, Rubber Sanding Block, 2-3/4 in x 5 in, 7000126109
5 × $19.14 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $11.06 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $500.06 -
×
3M 05520, Sanding Block, Rubber, 2-3/4 in x 8 in, 7000028366
10 × $24.73 -
×
3M Super Abrasives Roloc Disc, 2" Type-R, Medium AO High Strength, Box of 50
1 × $77.50 -
×
3M 20365, Scotch-Weld Epoxy Adhesive 2216, Gray, Part A, 5 Gallon Drum (Pail), 7000046361
5 × $508.22 -
×
Dynabrade 78177 2" Dia., Very Fine, NWN DynaBrite, TR Locking-Type Disc, 25/pack
25 × $1.98
3M 76746, Roloc Disc 777F, 50 YF-weight, TS, 2 in, Die RS200P, 7010363894
$1.18
Factory Stock, 7-10 Day Leadtime
3M Roloc Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Our 3M Roloc Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.
3M Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M Roloc Disc 777F products feature aluminum oxide mineral blended with 3M Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.
3M Roloc Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system.
