Our 3M Hookit attachment system provides excellent backing support and further simplifies disc changes, optimizing disc life, while the film backing provides a consistent finish. The purple aluminum oxide disc comes in a variety of sizes and is available in a range of grades.
Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. Reducing dust is easier than ever with 3M clean sanding discs. An open coat means the abrasive grains have space between them so that sanding debris collects in the spaces rather than loading the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints, and other materials that would, otherwise, clog the disc and hinder sanding ability.

Dynabrade 56451 Short Block Assy- 11" Gear Driven
Dynabrade 79897 8" Dynacut 320 Grit Extreme Orange Scalloped Edge Discs, 25 per box
Dynabrade 95585 Spring Pin
Dynabrade 54775 4" (102 mm) Dia. Right Angle Type 27 Depressed Center Wheel Grinder, .7 HP, 13,500 RPM, 3/8"-24 Spindle
Dynabrade 57841 Pad Top Assembly
Dynabrade 57584 6" Dia. Wet Dynorbital Supreme Random Orbital Sander, Basic, 3/32" Orbit
Dynabrade 91434 1/4" W x 24" L 60 Grit A/O DynaCut Belt, 50/pack
Dynabrade 69363 Vacuum Shroud, 6" Orbital
Dynabrade 58514 2-3/4" W x 7-3/4" L Dynabug II Orbital Sander, Non-Vacuum, .11 hp, 8,000 RPM, 3/16" Orbit
Dynabrade 78835 Crimped Wire End Brush 1" Dia. x .006 x 1" Stainless Steel
Dynabrade 11026 1/2" W x 7" L DynaPad Hard Platen Pad 5-Pkg.
Dynabrade 56671 Handle
Dynabrade 98275 - 1/2" Male Coupler with 1/2" Male Plug Assembly
Dynabrade 11815 Bolt
Dynabrade 14344 Tension Idler Arm
Dynabrade 93335 Carbide Burr, 3/8" Dia., SE-3 D/C Burr, Oval, 5/8" Flute L, 1/4" Shank
Dynabrade 79874 3" 600 Grit Dynacut Extreme Orange Film Vac Hook Face Disc, 50 per box
Dynabrade 11216 Contact Arm Ass'y, 5/8" Dia. x 1/8" W, Rubber Wheel, with 1/4" W Platen
Dynabrade 91125 3/4" W x 18" L 120 Grit A/O DynaCut Belt, 50/pack
Dynabrade 52430 4" (102 mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, .7 HP, 15,000 RPM, 3/8"-24 Spindle
Dynabrade 59083 Felt Washer
Dynabrade 59088 Vacuum Nozzle
Dynabrade 56859 6" Dia. Non-Vacuum Dynorbital Supreme Random Orbital Sander, 3/32" Orbit
Dyanbrade NF1B NitroFile Abrasive Belt Tool with 11206 Contact Arm and 15352 Drive Wheel, 5.hp 7 Degree Offset, 20,000 RPM, Gearless, Front Exhaust
Dynabrade 61503 Systainer T-Loc, Size II
Dynabrade 78483 3" Dia. x 1", 1/4-20 Female Center Thread, A/O, 120 Grit, 10-Ply J-DynaCut Cross Pad, 100/pack
Dynabrade 96644 Motor Tune-Up Kit for 2.8hp Rebel Series
Dynabrade 52563 7" Dia. Right Angle Disc Sander
Dynabrade 96542 Motor Tune-Up Kit
Dynabrade 07108 Rotor
Dynabrade 57573 5" Dia. Wet Dynorbital Supreme Random Orbital Sander, Deluxe, 3/16" Orbit
Dynabrade 91572 6" Dynacut Extreme Orange Premium Film Disc, 80 Grit, Hook & Loop, Non-Vacuum, 50/Box
Dynabrade 91705 DynaMesh 3" 220 Grit Hook & Loop Discs, 50 per box
Dynabrade 01558 Insulator Sleeve
Dynabrade 56818 5" Dia. Self-Generated Vacuum Dynorbital Supreme Random Orbital Sander, 3/16" Orbit
Dynabrade 97566 1/4" Safety Coupler, Female 
