Sharp Abrasive for a Refined Finish
With its open coat construction and aluminum oxide mineral abrasive, our 3M™ Stikit™ Gold Disc 216U provides a sharp cut – more aggressive than a comparable closed coat abrasive of the same grade – without as much dust accumulating on the disc. And its grades from P600 to P800 along with light A-weight paper backing make it ideal for feather-edging, as a final step before priming or for primer sanding.
Resists Dust and Debris
Open coat construction means the abrasive grains on our 3M™ Stikit™ Gold Disc 216U are placed with space between them to help evacuate sanding dust and other debris to avoid clogging the cutting edge of the grains. The load-resistant coating on the abrasive grains also allows the disc to continue cutting even when sanding paints and other materials that would otherwise clog the disc and hinder sanding ability. All of this adds up to increased productivity and reduced material consumption.
The Ease of a Disc Roll, The Speed of Stikit™ Attachment
3M™ Stikit™ disc rolls are multiple adhesive-backed abrasive discs rolled into a tube. This makes them easy to tear off one at a time for speed and efficiency, and there’s no need for liners which saves on material costs. These ready-to-use Stikit™ discs feature a pressure sensitive adhesive coating on the backs – simply press the disc onto the backup pad and you’re ready to go. They remove just as cleanly, leaving an uncontaminated surface for the next disc. A Stikit™ disc should be used with a 3M™ Stikit™ Disc Pad (we suggest 05555, 05556, 05575 or 00576, sold separately) on a random orbital sander.
Better Science for Better Sanding from 3M
Through a combination of science, strength and smoothness – from the abrasive grain to the fast adhesive attachment to the convenient disc roll packaging – our 3M™ Stikit™ Gold Disc 216U is another example of how 3M applies science to life, and makes your collision repair operation better and more efficient.

Dynabrade 61621 Motorhead for Model 61421
Dynabrade 15336 Rubber Drive Wheel
Dynabrade 91082 1-1/2" Dia. x 1-1/2" W, 120 Grit, Z/A DynaCut Band, 10/pack
Dynabrade 79514 1/2" W x 12" L Very Fine DynaBrite Plus Surface Conditioning Belt, 10/pack
Dynabrade 78378 5" Dia. x 7/8" Center Hole, Type 27, Extra Coarse DynaStrip Disc w/Fiberglass Backing, 10/pack
Dynabrade 53609 Felt Seal
Dynabrade 55203 Front Bearing Plate
Dynabrade 40378 Rubber Drive Wheel, Mini Dynafile II
Dynabrade 78489 4" Dia. x 1", 1/4-20 Female Center Thread, A/O, 60 Grit, 8-Ply J-DynaCut Cross Pad, 100/pack
Dynabrade 59498 - 5" Spirit Drop-In Motor, 3/16" Orbit Type "H"
Dynabrade 95526 O-Ring
Dynabrade 82576 1/4" W x 24" L 80 Grit Ceramic DynaCut Belt, 50/pack
Dynabrade 52584 4-1/2" Dia. Right Angle Type 41 Cutoff Wheel Tool
Dynabrade 11078 Contact Wheel Ass'y, 5/8" Dia. x 3/8" W x 3/8" I.D., Crown Face, 70 Duro Rubber
Dynabrade 90211 1/8" W x 18" L 60 Grit A/O DynaCut Belt, 50/pack
Dynabrade 92114 1/2" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
Dynabrade 01794 Rubber Drive Wheel
Dynabrade 52405 2" Dia. 7 Degree Offset Disc Sander, Rear Exhaust, .5 HP, 20,000 RPM, 1/4"-20 Thread
Dynabrade 92102 3" W x 10-11/16" L 80 Grit A/Z DynaCut Belt, 10/pack
Dynabrade 78055 1" W x 24" L Medium NWN DynaBrite Belt, 10/pack
Dynabrade 56178 6" Dia. Vacuum Disc Pad, Vinyl-Face
Dynabrade 90614 3" W x 10-11/16" L 80 Grit A/O DynaCut Belt, 10/pack
Dynabrade 51458 6"-8" (152 mm-203 mm) Dia. Right Angle Two-Hand Rotary Buffer 
