Restore Polish, Repair Automotive Imperfections
The discs on 3M™ Trizact™ Finesse-it™ Film Disc Roll 468LA are packaged in roll form, which makes dispensing the discs quick, easy and convenient. Simply unwind the roll to reveal new discs. Moreover, the roll protects the discs’ PSA backings and abrasive face from dirt and debris until they’re ready for use. The PSA backing on these discs also helps speed your timeline, as no special tools or accessories are required for disc-to-tool attachment3M™ Trizact™ Finesse-it™ Film Disc Roll 468LA is engineered by incorporating silicon carbide mineral into a matrix of repeating microstructures; the film backing minimizes the chance for surface abnormalities. The pressure sensitive adhesive on the back of the film adheres immediately to the tool back up pad. The micro-structured silicon carbide mineral cuts sharply enough to quickly remove imperfections, but not so much so that you risk gouging or marring the surface.
Combining the Power of 3M™ Trizact™ and 3M™ Finesse-it™ Abrasives
Derived from proprietary 3M Microreplication technology, 3M™ Trizact™ Abrasives consist of precisely-shaped three-dimensional structures distributed uniformly over the substrate. Unlike conventional abrasives, which are constructed from randomly spaced and irregular-shaped minerals, the uniform configuration of Trizact abrasives helps deliver consistent performance. Our line of 3M™ Finesse-it™ products are specially engineered abrasives, compounds, polishes, and buffing pads to be used on OEM and baked refinish paints to remove defects, sand scratches, or swirl marks on a variety of painted surfaces. Finesse-it™ products are an integral part of our recommended buffing system for repairing surface defects to clear coats, lacquered wood, solid surfaces, gelcoat, powder coat, industrial paint, and acrylic. When Trizact™ and Finesse-it™ are combined — you’re left with an abrasive that strikes the perfect balance for your automotive repair needs.

Dynabrade 78291 2" Dia. x 2A M Medium Type R Unitized Locking-Type Disc, 25/pack
Dynabrade 95840 Tune-Up Kit for Model 14200
Dynabrade 12221 Planetary Assembly
Dynabrade 57369 Lip Seal Shroud
Dynabrade 52413 3" Dia. 7 Degree Offset Disc Sander, Rear Exhaust, .7 HP, 15,000 RPM, 3/8"-24 Thread
Dynabrade 93546 1-1/2" Dia. x 8-32 Female Center Thread, 320 Grit, A/O, 3-Ply, J-DynaCut Eyelet Star, 50/pack
Dynabrade 96037 3/4" Flange Adapter
Dynabrade 90409 1/8" W x 24" L 120 Grit A/O DynaCut Belt, 50/pack
Dynabrade 13200 Dynastraight Finishing Tool, .7 HP, Rear Exhaust, 950 RPM
Dynabrade 58442 6" Dia. Two-Hand Gear-Driven Sander, Non-Vacuum, Non-Vacuum, .45 HP, 900 RPM, PSA
3M 03113, Vinyl Tape 471, Black, 1/2 in x 36 yd, 5.2 mil, 7000047456
Dynabrade 51301 .5 hp Straight-Line Die Grinder
Dynabrade 81244 2" W x 60" L Very Fine NWN Surface Conditioning Belt, 10/pack
Dynabrade 92764 3" W x 50' L 30 Micron, Diamond Lapping Film DynaCut Roll
Dynabrade 52276 .7 hp Straight-Line Die Grinder, Rear Exhaust, 15,000 RPM, 1/4" Collet
Dynabrade 98288 Shim
Dynabrade 40534 Brush
Dynabrade 01489 Rear Exhaust Cover
Dynabrade 79304 - 2-3/4" W X 45 L Yards, 180 Grit, A/O PSA Dynacut Roll
Dynabrade 54084 1-1/4" Mini-Dynorbital Disc Pad, Vinyl-Face
Dynabrade 51811 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/16" Collet
Dynabrade 57897 Vacuum Tube, Mini Dynabug
Dynabrade 02673 Rear Bearing Plate
Dynabrade 57404 2-3/4" W x 8" L Dynaline Sander, Central Vacuum
Dynabrade 54391 .7 hp Extended Right Angle Die Grinder, Rear Exhaust, 18,000 RPM, 1/4" Collet
Dynabrade 11203 Contact Arm Ass'y, 5/8" Dia. x 3/8" W, Rubber Wheel, with 1/2" W Platen
Dynabrade 01393 Drop-In Motor
Dynabrade 94993 1/4" Male Composite-Style Coupler with 1/4" Female Plug Assembly 
