Restore Polish, Repair Automotive Imperfections
The discs on 3M™ Trizact™ Finesse-it™ Film Disc Roll 468LA are packaged in roll form, which makes dispensing the discs quick, easy and convenient. Simply unwind the roll to reveal new discs. Moreover, the roll protects the discs’ PSA backings and abrasive face from dirt and debris until they’re ready for use. The PSA backing on these discs also helps speed your timeline, as no special tools or accessories are required for disc-to-tool attachment3M™ Trizact™ Finesse-it™ Film Disc Roll 468LA is engineered by incorporating silicon carbide mineral into a matrix of repeating microstructures; the film backing minimizes the chance for surface abnormalities. The pressure sensitive adhesive on the back of the film adheres immediately to the tool back up pad. The micro-structured silicon carbide mineral cuts sharply enough to quickly remove imperfections, but not so much so that you risk gouging or marring the surface.
Combining the Power of 3M™ Trizact™ and 3M™ Finesse-it™ Abrasives
Derived from proprietary 3M Microreplication technology, 3M™ Trizact™ Abrasives consist of precisely-shaped three-dimensional structures distributed uniformly over the substrate. Unlike conventional abrasives, which are constructed from randomly spaced and irregular-shaped minerals, the uniform configuration of Trizact abrasives helps deliver consistent performance. Our line of 3M™ Finesse-it™ products are specially engineered abrasives, compounds, polishes, and buffing pads to be used on OEM and baked refinish paints to remove defects, sand scratches, or swirl marks on a variety of painted surfaces. Finesse-it™ products are an integral part of our recommended buffing system for repairing surface defects to clear coats, lacquered wood, solid surfaces, gelcoat, powder coat, industrial paint, and acrylic. When Trizact™ and Finesse-it™ are combined — you’re left with an abrasive that strikes the perfect balance for your automotive repair needs.

Dynabrade 33031 Brush Holder
Dynabrade 51811 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/16" Collet
Dynabrade 67219 Power Arm, 2-3/4" Dia. x 2" W, 90 Duro Serrated Rubber
Dynabrade 53047 1/4" Drill Right Angle, .4 HP, Rear Exhaust, 15,000 RPM
Dynabrade 78068 1" W x 30" L Very Fine NWN DynaBrite Belt, 10/pack
Dynabrade 92727 1" W x 150' L 3 Micron A/O Lapping Film DynaCut Roll
Dynabrade 52635 5" Dia. Right Angle Disc Sander, Rotational Exhaust, 1.3 HP, 12,000 RPM, 5/8"-11 Thread
Dynabrade 52213 .5 hp 7 Degree Offset Die Grinder, Front Exhaust, Short Shank, 24,000 RPM, 1/4" Collet
Dynabrade 12122 Slider
Dynabrade 78677 1" x 1" x 1/4 Shank, 180 Grit, Dynabrite Interleaf Wheel, 10/pack
Dynabrade 11004 Dynafile Screw-In Housing
Dynabrade 11818 Spacer
3M 64110, General Purpose Vinyl Tape 764, Blue, 3 in x 36 yd, 5 mil, 7000124864
Dynabrade 78669 1/2" Dia. x 2" W x 1/8" Center Hole, Tapered Cartridge Rolls, A/O, 120 Grit, 100/pack
Dynabrade 56087 3" Dia. Non-Vacuum Disc Pad, Hook-Face, Short Nap
Dynabrade 22091 2-3/4" x 8" Hand Sanding Block
Dynabrade 94434 3-1/4" Dia. x 7" W Standard Dynacushion Pneumatic Wheel
Dynabrade 52239 - .4Hp Straight Die Grinder, 30K RPM, Front Exhaust, 1/4" Collet
Dynabrade 79933 6" Dia. x 320 Grit Non-Vacuum Hook-Face DynaCut Disc, 100/Box
Dynabrade 78177 2" Dia., Very Fine, NWN DynaBrite, TR Locking-Type Disc, 25/pack
Dynabrade 93343 Carbide Burr, 1/8" Dia., SE-41 D/C Burr, Oval, 7/32" Flute L, 1/8" Shank
Dynabrade 81010 2" W x 42" L 220 Grit A/O DynaCut Belt, 10/pack
Dynabrade 51854 .4 hp Trim Router (Complete), 30,000 RPM, 1/4 Collet
Dynabrade 11017 Spacer
Dynabrade 56133 Bearing
Dynabrade 52258 .7 hp Straight-Line Die Grinder, Front Exhaust, 20,000 RPM, 1/4" Collet
Dynabrade 90513 1" W x 30" L 220 Grit A/O DynaCut Belt, 50/pack
Dynabrade 82457 5" Dia. x 120 Grit A/O PSA Filmbac DynaCut Disc, 100/Box
Dynabrade 56863B - 6" Dia. Central Vacuum Dynorbital Supreme Random Orbital Sander
Dynabrade 93334 Carbide Burr, 3/8" Dia., SD-3 D/C Burr, Ball, 5/16" Flute L, 1/4" Shank
Dynabrade 79019 1" W x 18" L 36 Grit A/Z DynaCut Belt, 50/pack 
