-
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $553.91 -
×
Standard Abrasives 710870, Cartridge Roll Mandrel, 1/8 in x 1/2 in x 1/4 in x 1-1/4 in x 2-1/4 in CM-7, 7000121794
5 × $5.36 -
×
Standard Abrasives 873273, S/C Unitized Wheel, 732, 6 in x 1/4 in x 1/2 in, 7010301203
10 × $40.71 -
×
3M 66630, Cloth Belt 341D, 50 X-weight, 6 in x 48 in, Film-lok, Single-flex, 7000118864, 20 per case
20 × $13.17 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.82 -
×
3M 34556, Cubitron II Net Sheet Roll, 320+, 80 mm x 10 m, 7100283765, 6 Rolls/Case
6 × $28.94 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.80 -
×
3M 34555, Cubitron II Net Sheet Roll, 240+, 80 mm x 10 m, 7100247339, 6 Rolls/Case
6 × $32.83 -
×
ACS Diamond Cloth Belt, CX1250 3/4" X 18" 250U
8 × $8.80 -
×
3M 77512, Cloth Belt 777F, 60 YF-weight, 1 in x 42 in, Film-lok, Single-flex, 7010307736, 200 per case
200 × $5.56 -
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
2 × $1,520.00 -
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
1 × $734.00
Dynabrade 79407 4″ Dia. x 4″ W x 3/4″ Arbor Hole, Very Fine, NWN DynaBrite Finishing Flap Roll
$98.55
4″ Dia. x 4″ W x 3/4″ Arbor Hole, Very Fine, NWN DynaBrite Finishing Flap Roll, 5,000 RPM Max
Abrasive Specifications
Mfr. Part # 79407
| Abrasive Category | Non Woven Abrasives |
|---|---|
| Abrasive Diameter [inches] | 4″ |
| Abrasive Mineral Type | AO |
| Abrasive Shape | Wheels |
| Arbor Hole | 3/4″ |
| Abrasive Sub Shape | Flap Brush |
| Abrasive Width [inches] | 4″ |
| CE Certified | No |
| EAC Certified | No |
| Abrasive Backing Material | Woven Cloth |
| Abrasive Sub Shape 2 | Arbor Mount |
| Abrasive Tier | Good |
| EAN (UPC) Code | 0616026794047 |
| Quantity Each Pack | 1 |
| Abrasive Grit / Grade | Very Fine |
Related products
