-
×
Dynabrade 51989 Collar
1 × $201.07 -
×
Dynabrade 52580 4" (102 mm) Dia. Straight-Line 6" (152 mm) Extension Cut-Off Wheel Tool, Rear Exhaust, 1 HP, 18,000 RPM, 3/8"-24 Spindle
1 × $818.00 -
×
Dynabrade 33195 NDDP2005, Left Hand Clamp Lever
1 × $1.25 -
×
Dynabrade 21751 ND9010, Transmission Housing
1 × $138.35
-
×
Dynabrade 98277 1-3/8" Open End Wrench
1 × $12.69
-
×
Dynabrade 98247 #10 Plywood Screw
1 × $2.07
-
×
Dynabrade 11462 Dynabelter Finisher
1 × $2,196.00 -
×
Dynabrade 53598 Ext. Vacuum Shroud
1 × $408.95
-
×
Dynabrade 78546 1-1/4"Dia. 2-Set, 8-32 Female Center Thread, 80 Grit, Dynacut A/O Overlap Slotted Disc, 100/pack
100 × $1.33 -
×
Dynabrade 77775 5" Dia. x 7/8" Center Hole, 120 Grit, Type 27, Ceramic DynaCut Flap Disc, 10/pack
10 × $65.30 -
×
Dynabrade 94851 12' Max Flow 5/16" I.D. Air Hose Assembly, Male (1/4") / Male (1/4") Fitting Ends Included
2 × $73.36 -
×
Dynabrade 40378 Rubber Drive Wheel, Mini Dynafile II
1 × $140.64 -
×
Dynabrade 02167 Housing for Model 52293
1 × $109.36
-
×
Dynabrade 54421 3" Dia. Right Angle Disc Sander, Steel Housing, Rear Exhaust, .7 HP, 18,000 RPM, 3/8"-24 Thread
1 × $1,063.00 -
×
Dynabrade 78750 1" x 1"-A25 DynaFire A/O Mounted Point, Vitrified, 5/pack
5 × $3.51 -
×
Dynabrade 48535 3" Dia. Epic Finish Kit With 48531 Geared Disc Sander, Rear Exhaust, .4 HP, 15,000 RPM
1 × $586.50 -
×
Dynabrade 82471 5" Dia. x 240 Grit, A/O, Vacuum PSA Filmbac DynaCut Disc, 100/Pack
100 × $1.05 -
×
Standard Abrasives 715081, A/O Straight Cartridge Roll, 5/8 in x 2 in x 3/16 in 60, 7100102991
50 × $1.01 -
×
Dynabrade 55204 Vane Set (4pk)
1 × $39.08 -
×
Dynabrade 40754 Switch Rod
1 × $5.49
Dynabrade 77767 5″ Dia. x 7/8″ Center Holes, 40 Grit, Z/A, Type 27, DynaCut Flap Disc w/Fiberglass, 10/pack
$5.82
5″ Dia. x 7/8″ Center Holes, 40 Grit, Z/A, Type 27, 10/pack
For stock removal, deburring, blending, edge-chamfering and rust removal. Can also be used for general cleaning and finishing.
Abrasive Specifications
Mfr. Part # 77767
| Abrasive Category | Coated Abrasives |
|---|---|
| Abrasive Diameter [inches] | 5″ |
| Abrasive Mineral Type | AZ |
| Abrasive Shape | Discs |
| Center Hole Dia. [Inches] | 7/8″ |
| Diameter [inches] | 5″ |
| Disc Type | Z/A |
| Max. RPM | 12,000 |
| Abrasive Sub Shape | Flap Disc |
| CE Certified | No |
| EAC Certified | No |
| Height [inches] | 0.0 |
| Length [inches] | 0.0 |
| Weight [pounds] | 0.0 |
| Width [inches] | 0.0 |
| Abrasive Backing Material | Fiber |
| Abrasive Sub Shape 2 | T27 |
| Abrasive Tier | Better |
| EAN (UPC) Code | 0616026777668 |
| Quantity Each Pack | 10 |
| Abrasive Grit / Grade | 40 |
| Type | Type 27 |
Related products
Dynabelter Contact Arms
Dynabrade 11684 Dynabelter Contact Arm Assembly 4″ DIA X 5/8″ W., 40 Duro Serrated
$438.51
