Recommended Applications
The multi-layered Standard Abrasives Aluminum Oxide Cartridge Roll exposes new abrasive cutting points throughout the life of the roll. Combining an aggressive cut with durability makes it great for polishing, edge breaking and removal of machine tool marks or flash. Its small size and shape enable it to blend, deburr and polish inside holes and diameters or on irregular surfaces and contours. The cartridge roll has an arbor hole to accommodate a mandrel tool attachment (sold separately). This mandrel attaches to a rotary tool such as a die grinder or drill and comes in different sizes to fit a variety of cartridge roll sizes. Together, the mandrel and cartridge roll enable the user to grind or finish hard-to-reach areas of a workpiece, such as angles and curves.
The Aluminum Oxide Cartridge Rolls come in a variety of sizes and grades, so it can be tailored to meet your project needs. Grades range from 36 to 400, producing a spectrum of finishes, from coarse to fine. It is made with aluminum oxide mineral, which cuts sharp and is friable – fragmenting under heat and pressure to reveal sharp cutting edges as it abrades the surface. The straight roll design is cylindrical, which helps it roll over irregular contours.
Benefits of a Multi-Layer Design
The multi-layer, multi-wear design of Standard Abrasives Aluminum Oxide Cartridge Roll keeps it cutting sharp and helps it withstand repeated wear. As top layers wear down over time, underlying layers expose fresh mineral, so you get a consistent cut, part after part. Wrapping multiple layers of the abrasive material around into a roll contributes to its sturdiness and durability. A resin bond securely anchors mineral to the cloth backing – also enhancing the abrasive’s toughness and strength. The closed-coat construction means mineral grains cover 100 percent of the cloth backing, so you get a smoother, more consistent finish is achieved. Seemingly small, these cartridge rolls conquer big challenges when space gets tight.

3M 02960, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1 in x 1 in, 7100009186, Box of 3
3M 14725, Foam and Fabric Spray Adhesive 24, Orange, 16 fl oz Can (Net Wt 13.8 oz), 7100179450, 12/Case
ACS Diamond Cloth Belt, CX1250 1" X 72" 125U
Standard Abrasives 727098, Surface Conditioning Band, 2 in x 2 in CRS, 7010368751
3M 47181, Polyurethane Adhesive Sealant 550FC Fast Cure, Black, 600 mL Sausage Pack, 7100197989, 12/Case
3M 40214, Cloth Spiral Band 341D, 36 X-weight, 1 in x 1 in, 7100138140
3M 20227, Scotch-Seal Metal Sealant 2084, Silver, 5 oz Tube, 7000046343, 36/Case
3M 41531, Scotch-Weld Epoxy Adhesive 420, Black, Part B, 5 Gallon Drum (Pail), 7000000827
3M 94700, Cubitron ll Cloth Belt 947A, 60+ X-weight, 1/4 in x 24 in, Fabri-lok, Single-flex, 7010360589, 200 per case
3M 40208, Cloth Spiral Band 341D, P120 X-weight, 1 in x 1 in, 7100138144
3M 45528, Cloth Spiral Band 341D, P180 X-weight, 1 in x 1 in, 7010309037
Standard Abrasives 727096, Surface Conditioning Band, 2 in x 1 in MED, 7010368750
3M 08275, Rigid Parts Repair, 08275, Blue, 400 mL Cartridge, 7000119864
Standard Abrasives 727088, Surface Conditioning Band, 1 in x 1 in VFN, 7010368747
Standard Abrasives 702568, Aluminum Oxide Spiral Band, 80, 1 in x 1 in, 7100138190
Dynabrade 91072 1" Dia. x 1" W, 120 Grit, Z/A DynaCut Band, 10/pack
Standard Abrasives 701217, Aluminum Oxide Spiral Band, 60, 1 in x 1 in, 7100138185
3M 66261, Wind Protection Tape Edge Sealer W2600, 50 ml (1.7 fluid ounce), 7000049496, 12/Case
Insize ISV-1H4177, RIGID BORESCOPE, 6.85", 6928640323775
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
3M 20105, Scotch-Weld Epoxy Adhesive 1751, Gray, Part B/A, 1 Gallon Kit, 7000046339, 2/case
3M 30202, Disposable Plastic Wheel Maskers, 12 in - 15 in, 125 per box, 7000125074
Dynabrade 78585 1/4" Dia. x 1-1/2" W x 1/8" Center Hole, 120 Grit, 100/pack 

