Recommended Applications
The multi-layered Standard Abrasives Aluminum Oxide Cartridge Roll exposes new abrasive cutting points throughout the life of the roll. Combining an aggressive cut with durability makes it great for polishing, edge breaking and removal of machine tool marks or flash. Its small size and shape enable it to blend, deburr and polish inside holes and diameters or on irregular surfaces and contours. The cartridge roll has an arbor hole to accommodate a mandrel tool attachment (sold separately). This mandrel attaches to a rotary tool such as a die grinder or drill and comes in different sizes to fit a variety of cartridge roll sizes. Together, the mandrel and cartridge roll enable the user to grind or finish hard-to-reach areas of a workpiece, such as angles and curves.
The Aluminum Oxide Cartridge Rolls come in a variety of sizes and grades, so it can be tailored to meet your project needs. Grades range from 36 to 400, producing a spectrum of finishes, from coarse to fine. It is made with aluminum oxide mineral, which cuts sharp and is friable – fragmenting under heat and pressure to reveal sharp cutting edges as it abrades the surface. The straight roll design is cylindrical, which helps it roll over irregular contours.
Benefits of a Multi-Layer Design
The multi-layer, multi-wear design of Standard Abrasives Aluminum Oxide Cartridge Roll keeps it cutting sharp and helps it withstand repeated wear. As top layers wear down over time, underlying layers expose fresh mineral, so you get a consistent cut, part after part. Wrapping multiple layers of the abrasive material around into a roll contributes to its sturdiness and durability. A resin bond securely anchors mineral to the cloth backing – also enhancing the abrasive’s toughness and strength. The closed-coat construction means mineral grains cover 100 percent of the cloth backing, so you get a smoother, more consistent finish is achieved. Seemingly small, these cartridge rolls conquer big challenges when space gets tight.

 3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092						 3M 05520, Sanding Block, Rubber, 2-3/4 in x 8 in, 7000028366
3M 05520, Sanding Block, Rubber, 2-3/4 in x 8 in, 7000028366						 3M 34573, Cubitron II Net Sheet Roll, 120+, 115 mm x 10 m, 7100247507, 6 Rolls/Case
3M 34573, Cubitron II Net Sheet Roll, 120+, 115 mm x 10 m, 7100247507, 6 Rolls/Case						 3M 15938 Scotch-Brite Surface Conditioning Low Stretch Belt, SC-BL, A/O Medium, 1-1/2 in x 60 in, 7010300824
3M 15938 Scotch-Brite Surface Conditioning Low Stretch Belt, SC-BL, A/O Medium, 1-1/2 in x 60 in, 7010300824						 3M 76523, Cloth Belt 777F, 50 YF-weight, 2 in x 72 in, Film-lok, Single-flex, 7000118456, 50 per case
3M 76523, Cloth Belt 777F, 50 YF-weight, 2 in x 72 in, Film-lok, Single-flex, 7000118456, 50 per case						 3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737						 3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069						 Standard Abrasives 37446, PSA A/O Disc, 700595, 1-1/2 in x NH, 60, 7010331822
Standard Abrasives 37446, PSA A/O Disc, 700595, 1-1/2 in x NH, 60, 7010331822						 Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool						 3M 05526, Wetordry Sponge Pad 20, 5-1/2 x 2-3/4 in x 3/8 in, 7000045663
3M 05526, Wetordry Sponge Pad 20, 5-1/2 x 2-3/4 in x 3/8 in, 7000045663						 3M 30704, Cloth Belt 577F, 120 YF-weight, 2 in x 60 in, Film-lok, Single-flex, 7010292532, 50 per case
3M 30704, Cloth Belt 577F, 120 YF-weight, 2 in x 60 in, Film-lok, Single-flex, 7010292532, 50 per case						 Dynabrade 91164 3/8" W x 13" L 120 Grit A/O DynaCut Belt, 50/pack
Dynabrade 91164 3/8" W x 13" L 120 Grit A/O DynaCut Belt, 50/pack						


