Recommended Applications
The multi-layered Standard Abrasivesâ„¢ Aluminum Oxide Cartridge Roll exposes new abrasive cutting points throughout the life of the roll. Combining an aggressive cut with durability makes it great for polishing, edge breaking and removal of machine tool marks or flash. Its small size and shape enable it to blend, deburr and polish inside holes and diameters or on irregular surfaces and contours. The cartridge roll has an arbor hole to accommodate a mandrel tool attachment (sold separately). This mandrel attaches to a rotary tool such as a die grinder or drill and comes in different sizes to fit a variety of cartridge roll sizes. Together, the mandrel and cartridge roll enable the user to grind or finish hard-to-reach areas of a workpiece, such as angles and curves.
The Aluminum Oxide Cartridge Rolls come in a variety of sizes and grades, so it can be tailored to meet your project needs. Grades range from 36 to 400, producing a spectrum of finishes, from coarse to fine. It is made with aluminum oxide mineral, which cuts sharp and is friable – fragmenting under heat and pressure to reveal sharp cutting edges as it abrades the surface. The straight roll design is cylindrical, which helps it roll over irregular contours.
Benefits of a Multi-Layer Design
The multi-layer, multi-wear design of Standard Abrasivesâ„¢ Aluminum Oxide Cartridge Roll keeps it cutting sharp and helps it withstand repeated wear. As top layers wear down over time, underlying layers expose fresh mineral, so you get a consistent cut, part after part. Wrapping multiple layers of the abrasive material around into a roll contributes to its sturdiness and durability. A resin bond securely anchors mineral to the cloth backing – also enhancing the abrasive’s toughness and strength. The closed-coat construction means mineral grains cover 100 percent of the cloth backing, so you get a smoother, more consistent finish is achieved. Seemingly small, these cartridge rolls conquer big challenges when space gets tight.

3M 26022, PPS Series 2.0 Adapter, Type S12, 10 mm Male, 1.0 mm Thread, 7100135943
Insize 6318, CALIPER/MICROMETER GRINDING MACHINE (caliper grinding blocks are included), 6940561953862
Dynabrade 90211 1/8" W x 18" L 60 Grit A/O DynaCut Belt, 50/pack
3M 28476, Disc pad Hub, 2-1/2 in 5/8-11 Internal Low Profile, 7000045288
3M 14593, Scotch-Brite Cut and Polish Disc, 3" x 1-1/4" x 1/4" A Medium, D5, 7000045941, Box of 10
3M 27468, EMI Copper Foil Shielding Tape 1181, 1 in x 18 yd (25,40 mm x 16,5 m), 7000132169
3M 37442, Scotch Duct Tape 910-CHV-C, 1.88 in x 10 yd (48 mm x 9,14 m), 7100183292
3M 16615, Accuspray Atomizing Head, Blue, 1.2 mm, 7100086837 (4 Nozzle/Kit)
3M 07500 Roloc+ Holder, 1 in x 1/4 in Shank, 7000144595
3M 22963, Cloth Belt 341D, 36 X-weight, 4 in x 36 in, Film-lok, Single-flex, 7010298938, 50 per case
3M 26130, PPS Series 2.0 Adapter, Type S35, 16 mm Female, 1.5 mm
Thread Stretched, 7100135926
3M 26016, PPS Series 2.0 Adapter, Type S9, 16 mm Male, 1.5 mm Thread, 7100135330
Standard Abrasives 710130, A/O Tapered Cone Point, C-30 120, 7100116601, 100 per case
3M 35083, EMI Copper Foil Shielding Tape 1181, 1/4 in x 18 yd (6,35 mm x 16,5 m), 7000132168
Dynabrade 98265 3/8" Female Coupler with 3/8" Male Plug Assembly
3M 08302, Ultrapro Autobody Sealant, Clear, 5 oz Tube, 7000120449, 6 per case
3M 26127, PPS Series 2.0 Adapter, Type S31, 1/8 Male, 28 Thread BSP, 7100135953
3M 5681, Disc Pad Holder 915, 5 in x 1/8 in x 3/8 in M14-2.0 Internal, 7000028500
Standard Abrasives 709700, A/O Straight Cartridge Roll, 1/4 in x 1-1/2 in x 1/8 in 320, 7100080013
Dynabrade 78589 1/4" Dia. x 2" W x 1/8" Center Hole, 120 Grit, 100/pack
Standard Abrasives 704582, A/O Straight Cartridge Roll, 1/4 in x 1-1/2 in x 1/8 in 240, 7100080031
Dynabrade 95676 1/4" Female Coupler with 1/4" Male Plug Assembly
3M 19674, Scotch-Seal Industrial Sealant 800, Reddish Brown, 5 oz Tube, 7000000792, 36/Case
3M 05688, Hookit Sanding Block, 1-1/2 in X 2-5/8 in X 16 in, 7000119961
3M 16582, Accuspray Atomizing Head, Blue, 1.2 mm, 7010363219
Dynabrade 92116 1/2" W x 12" L 320 Grit A/O DynaCut Belt, 50/pack 

