Recommended Applications
The multi-layered Standard Abrasives™ Aluminum Oxide Cartridge Roll exposes new abrasive cutting points throughout the life of the roll. Combining an aggressive cut with durability makes it great for polishing, edge breaking and removal of machine tool marks or flash. Its small size and shape enable it to blend, deburr and polish inside holes and diameters or on irregular surfaces and contours. The cartridge roll has an arbor hole to accommodate a mandrel tool attachment (sold separately). This mandrel attaches to a rotary tool such as a die grinder or drill and comes in different sizes to fit a variety of cartridge roll sizes. Together, the mandrel and cartridge roll enable the user to grind or finish hard-to-reach areas of a workpiece, such as angles and curves.
The Aluminum Oxide Cartridge Rolls come in a variety of sizes and grades, so it can be tailored to meet your project needs. Grades range from 36 to 400, producing a spectrum of finishes, from coarse to fine. It is made with aluminum oxide mineral, which cuts sharp and is friable – fragmenting under heat and pressure to reveal sharp cutting edges as it abrades the surface. The straight roll design is cylindrical, which helps it roll over irregular contours.
Benefits of a Multi-Layer Design
The multi-layer, multi-wear design of Standard Abrasives™ Aluminum Oxide Cartridge Roll keeps it cutting sharp and helps it withstand repeated wear. As top layers wear down over time, underlying layers expose fresh mineral, so you get a consistent cut, part after part. Wrapping multiple layers of the abrasive material around into a roll contributes to its sturdiness and durability. A resin bond securely anchors mineral to the cloth backing – also enhancing the abrasive’s toughness and strength. The closed-coat construction means mineral grains cover 100 percent of the cloth backing, so you get a smoother, more consistent finish is achieved. Seemingly small, these cartridge rolls conquer big challenges when space gets tight.

Dynabrade 12207 Stockade Reciprocating Stockade Filer/Saw Versatility Kit, 2,400 SPM
Dynabrade 92150 1/2" W x 18" L 80 Grit Ceramic DynaCut Scalloped Edge Belt, 50/pack
Dynabrade 51459 6"-8" Dia. Right Angle Two-Hand Rotary Buffer, .7 hp, 2,500 RPM, Rear Exhaust, 5/8"-11 Spindle Thread
Dynabrade 30336 Dynascaler Surface Preparation Tool, Hand-Held, 2", Rear Exhaust, 3,400 RPM
Dynabrade 40320 Dynafile II Abrasive Belt Tool
Dynabrade 51396 6"-8" (152 mm-203 mm) Dia. Right Angle Two-Hand Rotary Buffer
Dynabrade 52725 1 hp Straight-Line Extension Polisher, 1 HP, 4,500 RPM, 1/2"-20 Spindle Thread
Dynabrade 57900 Dynafine Detail Sander, Non-Vacuum, .12 HP, 13,000 RPM, 1/32" Orbit
Dynabrade 22070 Downdraft Table Accessory Pack (Air Manifold, FRL and On/Off Air Valve)
Insize 8911-500MGE2, WEIGHT _500mg, 6940561906233
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
Standard Abrasives 702309, A/O Straight Cartridge Roll, 1/4 in x 1 in x 1/8 in 240, 7100080029
Standard Abrasives 709700, A/O Straight Cartridge Roll, 1/4 in x 1-1/2 in x 1/8 in 320, 7100080013
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
Standard Abrasives 700718, A/O Straight Cartridge Roll, 1/4 in x 1-1/2 in x 1/8 in 180, 7100080030
ACS 2" Diamond Disc, 60 Mesh, W/ Metal Button
Standard Abrasives 704582, A/O Straight Cartridge Roll, 1/4 in x 1-1/2 in x 1/8 in 240, 7100080031
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
Dynabrade 95544 Gear Grease, 2.5oz. Tube 

