Recommended Applications
The multi-layered Standard Abrasives Aluminum Oxide Cartridge Roll exposes new abrasive cutting points throughout the life of the roll. Combining an aggressive cut with durability makes it great for polishing, edge breaking and removal of machine tool marks or flash. Its small size and shape enable it to blend, deburr and polish inside holes and diameters or on irregular surfaces and contours. The cartridge roll has an arbor hole to accommodate a mandrel tool attachment (sold separately). This mandrel attaches to a rotary tool such as a die grinder or drill and comes in different sizes to fit a variety of cartridge roll sizes. Together, the mandrel and cartridge roll enable the user to grind or finish hard-to-reach areas of a workpiece, such as angles and curves.
The Aluminum Oxide Cartridge Rolls come in a variety of sizes and grades, so it can be tailored to meet your project needs. Grades range from 36 to 400, producing a spectrum of finishes, from coarse to fine. It is made with aluminum oxide mineral, which cuts sharp and is friable – fragmenting under heat and pressure to reveal sharp cutting edges as it abrades the surface. The straight roll design is cylindrical, which helps it roll over irregular contours.
Benefits of a Multi-Layer Design
The multi-layer, multi-wear design of Standard Abrasives Aluminum Oxide Cartridge Roll keeps it cutting sharp and helps it withstand repeated wear. As top layers wear down over time, underlying layers expose fresh mineral, so you get a consistent cut, part after part. Wrapping multiple layers of the abrasive material around into a roll contributes to its sturdiness and durability. A resin bond securely anchors mineral to the cloth backing – also enhancing the abrasive’s toughness and strength. The closed-coat construction means mineral grains cover 100 percent of the cloth backing, so you get a smoother, more consistent finish is achieved. Seemingly small, these cartridge rolls conquer big challenges when space gets tight.

3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
Dynabrade 51624 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
3M 23897, Cloth Belt 777F, 60 YF-weight, 1 in x 18 in, Fabri-lok, Full-flex, 7010307894, 200 per case
3M 05536, Cubitron II Cloth Belt 981F, 4 x 132 in, 60+, YF-weight, Film-lok, 7100163076, 25 per case
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
3M 66626, Cloth Belt 341D, 50 X-weight, 4 in x 36 in, Fabri-lok, Single-flex, 7010308385, 25 per case
Dynabrade 51703 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 1/8" Collet
3M 20230, Scotch-Seal Metal Sealant 2084, Silver, 5 Gallon Drum (Pail), 7000046344
Dynabrade 14000 Dynafile Abrasive Belt Tool
3M 71355, 663FC, 2" X 48", 70u, Diamond Trizact Belts, 7010534884
3M 20910, PSA Cloth Disc 348D, 60 X-weight, 2 in x NH, Die 200P, 7000118872
3M 97956, Super 77 CA Multipurpose Spray Adhesive, Low VOC <25%, Clear, 24 fl oz Can, 7100014109, 12/Case
3M 06535, Marine Adhesive Sealant 5200FC Fast Cure, PN06535, White, 1 oz Tube, 7010367674, 12/Case
3M 20927, PSA Cloth Disc 348D, P240 X-weight, 1 in x NH, Die 100N, 7000118918
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
Dynabrade 51700 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
3M 86992, Diamond Disc, 3" Roloc, 674W, 120 Mesh, TR, 7100143477, Box of 5
3M 32518, Cloth Belt 341D, P120 X-weight, 9 in x 48 in, Film-lok, Single-flex, 7010307962, 20 per case
ACS CX1250 Diamond Belt, 1/2" X 24" 125u
Dynabrade 51708 .1 hp Straight-Line Pencil Grinder, 35,000 RPM, 3/32" Collet
ACS Diamond Cloth Belt, CX1250 1/4" X 24" 75U
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
3M 05612, Polyurethane Glass Adhesive Sealant 590, Black, 600 mL Sausage Pack, 7000121536, 12/Case
Dynabrade 55501 .1hp Pencil Grinder, Twin Turbine, 100,000 RPM, Nickel-Plated Aluminum Housing, 3mm Collet
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
Dynabrade 93341 Carbide Burr, 1/8" Dia., SC-42 D/C Burr, Cylinder-Radiused End, 9/16" Flute L, 1/8" Shank
Dynabrade 95544 Gear Grease, 2.5oz. Tube 

