Recommended Applications
The multi-layered Standard Abrasives Aluminum Oxide Cartridge Roll exposes new abrasive cutting points throughout the life of the roll. Combining an aggressive cut with durability makes it great for polishing, edge breaking and removal of machine tool marks or flash. Its small size and shape enable it to blend, deburr and polish inside holes and diameters or on irregular surfaces and contours. The cartridge roll has an arbor hole to accommodate a mandrel tool attachment (sold separately). This mandrel attaches to a rotary tool such as a die grinder or drill and comes in different sizes to fit a variety of cartridge roll sizes. Together, the mandrel and cartridge roll enable the user to grind or finish hard-to-reach areas of a workpiece, such as angles and curves.
The Aluminum Oxide Cartridge Rolls come in a variety of sizes and grades, so it can be tailored to meet your project needs. Grades range from 36 to 400, producing a spectrum of finishes, from coarse to fine. It is made with aluminum oxide mineral, which cuts sharp and is friable – fragmenting under heat and pressure to reveal sharp cutting edges as it abrades the surface. The straight roll design is cylindrical, which helps it roll over irregular contours.
Benefits of a Multi-Layer Design
The multi-layer, multi-wear design of Standard Abrasives Aluminum Oxide Cartridge Roll keeps it cutting sharp and helps it withstand repeated wear. As top layers wear down over time, underlying layers expose fresh mineral, so you get a consistent cut, part after part. Wrapping multiple layers of the abrasive material around into a roll contributes to its sturdiness and durability. A resin bond securely anchors mineral to the cloth backing – also enhancing the abrasive’s toughness and strength. The closed-coat construction means mineral grains cover 100 percent of the cloth backing, so you get a smoother, more consistent finish is achieved. Seemingly small, these cartridge rolls conquer big challenges when space gets tight.

Norton 66254489957 Wheel, Vortex-7am, 6" X 1/2" X 1" C2312 Nor VTME7 PH VTC+, 4 Each
3M 05777, Hookit Soft Interface Pad, 6 x 1/2 x 3/4 inch, 7000028239
Standard Abrasives 727094, Surface Conditioning Band, 1-1/2 in x 1-1/2in VFN, 7010368749
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
Standard Abrasives 722809, PSA A/O Extra Disc, 5 in x NH, 60, 7010368721
Dynabrade 92120 1/4" W x 12" L 320 Grit A/O DynaCut Belt, 50/pack
3M 80514, Disc Pad Face Plate Ribbed, 7 in Extra Hard Red, 7000028419
3M 03601, Plastic Emblem and Trim Adhesive, 1 oz, 7100045880, 24 per case
3M 21210, Super 77 Multipurpose Spray Adhesive, 24 fl oz Can (Net Wt 16.75 oz), 7000000931, 12/Case
3M 69602, Cloth Belt 777F, 60 YF-weight, 1 in x 11 in, Sine-lok, Full-flex, 7010295223, 500 per case
3M 26597, Cloth Belt 341D, P320 X-weight, 1 in x 42 in, Film-lok, Single-flex, 7010294511, 200 per case
3M 33443, Cubitron II File Belt, 36+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033184, 10 belts per carton, 5 cartons per case
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
3M 21463, Marine Adhesive Sealant 5200, White, 5 Gallon Drum (Pail), 7010325698
3M 20931, PSA Cloth Disc 348D, P100 X-weight, 1 in x NH, Die 100N, 7000118915
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
3M 62610, Scotch-Weld Threadlocker TL62, Red, 50 mL Bottle, 7100039196, 10/case
Dynabrade 91429 1/2" W x 12" L 80 Grit A/O DynaCut Belt, 50/pack
3M 02960, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1 in x 1 in, 7100009186, Box of 3
3M 14725, Foam and Fabric Spray Adhesive 24, Orange, 16 fl oz Can (Net Wt 13.8 oz), 7100179450, 12/Case
ACS CX1250 Diamond Belt, 1/2" X 24" 9u
Dynabrade 69522 Housing for 69500, 5,000 RPM
3M 62612, Scotch-Weld Threadlocker TL71, Red, 10 mL Bottle, 7100039197, 10/case
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
3M 86992, Diamond Disc, 3" Roloc, 674W, 120 Mesh, TR, 7100143477, Box of 5
3M 19674, Scotch-Seal Industrial Sealant 800, Reddish Brown, 5 oz Tube, 7000000792, 36/Case
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
3M 17098, Hood Assembly with Sealed Seams Inner Shroud and Premium Head Suspension S-857, 7000002350, 1 EA/Case
3M 20279, Disc Pad Holder 947TH, 7 in x 1 in x 5/8-11 Internal Black T Hook, 7000118602
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 250U
3M 16579, Accuspray ONE Replacement Spray Gun, 7100096183
3M 20272, Neoprene Contact Adhesive 10, Light Yellow, 1 Quart Can, 7100011456, 12/case
3M 98242, Marine Adhesive Sealant 3000 UV, Black, 290 mL Cartridge, 7100111111, 12/Case
3M 76625, Roloc Disc 777F, 80 YF-weight, TR, 1 in, Die R100N, 7000045621
Standard Abrasives 32533 Surface Conditioning RC Belt 888052, 1/2 in x 24 in MED, 7000121665
3M 47201, Polyurethane Sealant 540, Black, 600 mL Sausage Pack, 7100198009, 12/Case 

