-
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
1000 × $0.60 -
×
Dynabrade 58441 5" Dia. Two-Hand Gear-Driven Sander, Non-Vacuum, .45 HP, 900 RPM, Hook-Face Pad
2 × $583.00 -
×
3M 02590, Stikit Gold Sheet Roll, P400, 2-3/4 in x 45 yd, 7000028254
10 × $62.51 -
×
Standard Abrasives 701656, Cartridge RoII Mandrel, 3/16 in x 2 in x 1/4 in x 1-1/4 in x 4 in CM-18, 7010368730
5 × $5.56 -
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
1 × $18,352.22 -
×
3M 45569, Cubitron ll Cloth Belt 784F, 120+ XF-weight, 2 in x 72 in, Film-lok, Single-flex, 7010362613, 50 per case
50 × $8.14 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
3M 05742, Hookit Soft Hand Block, 2-3/4 x 5 in, 7000045436
10 × $44.97 -
×
3M 05440, Stikit Hand Block, Hard 2-3/4 in x 5 in, 7000045764
10 × $26.95 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67 -
×
3M 71878, Flexible Diamond Hand File 6210J, Yellow 18, N40, NO 1, 7000082156, 10 per case
1 × $95.83 -
×
3M 05519, Sanding Block, Rubber, 2-3/4 in x 5 in, 7000000587
10 × $18.37 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $1,721.00 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14 -
×
3M 87103, Cloth Belt 341D, 24 X-weight, 9 in x 20 in, Fabri-lok, Single-flex, 7010326200, 20 per case
20 × $18.86 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
Standard Abrasives 707505, PSA A/O Disc, 12 in x NH, 40 Grit, 7010369974
10 × $6.35 -
×
Standard Abrasives 713638, Cartridge RoII Mandrel, 3/32 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-2B, 7010294964
5 × $4.32 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
3M 30289, Trizact Hookit Finishing Foam Sheet, 5000, 2-3/4 in x 5-1/2 in, 7000120135, 15 Sheets/Carton
4 × $55.66 -
×
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
18 × $9.52 -
×
3M 76631, Roloc Disc 777F, TR, 3 in x NH, 36 YF-weight, 7000028339
200 × $1.61 -
×
3M 98534, Premium Matte Cloth (Gaffers) Tape GT3, Black, 72 mm x 50 m, 11 mil, 7010291525
16 × $90.13
3M 99422, Wetordry Sanding Sheets 99422NA, 9 in x 11 in, 220 grit, 7000126426, 25 sheets per pack
$16.99
Factory Stock, 7-10 Day Leadtime
3M Wetordry allows you to sand between coats of varnish and paint or other finishes. Can be used with water to reduce clogging and extend abrasive life. Ideal for sanding metal for repainting or prior to primer coat.
3M Pro pak Wet or Dry abrasives are specially designed for wet or dry sanding. Use 3M Imperial Wetordry Sandpaper for a premiere finish on lacquers, primers, sealers, plastics and paints. For final or between coats sanding.
Related products
General Use Tapes
3M 98514, Premium Matte Cloth (Gaffers) Tape GT2, Black, 48 mm x 50 m, 11 mil, 7010336132
$60.09
Utility Cloth Rolls
3M 19769, Utility Cloth Sheet 314D, 9 in x 11 in P150 J-weight, 7000000357
$1.37
Non-Woven Hand Pads
3M 07415, Hand Sanding Wood Finishing Pad 7415NA, 4.375 in x 11 in, Gray Fine, 7010383728
$1.77
Non-Woven Hand Pads
3M 07414, Hand Sanding Metal Finishing Pad 7414NA, 4.375 in x 11 in, Maroon Medium, 7010315820
$1.77