-
×
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $1,025.00 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 30u
12 × $7.60 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
20 × $12.65 -
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
1 × $18,352.22 -
×
3M 07414, Hand Sanding Metal Finishing Pad 7414NA, 4.375 in x 11 in, Maroon Medium, 7010315820
10 × $1.77 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
ACS Diamond Cloth Belt, CX1250 3" X 90" 9U
2 × $171.30 -
×
3M 26018, PPS Series 2.0 Adapter, Type S11, 3/8 Male, 18 Thread NPS, 7100135942
1 × $25.96 -
×
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
2 × $129.94 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
2 × $6,424.71 -
×
3M 30697, Cloth Belt 577F, 120 YF-weight, 2 in x 72 in, Film-lok, Single-flex, 7010300158, 50 per case
50 × $7.09 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.58 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33 -
×
3M 34118, 663FC, 2" X 120", 70u, Diamond Trizact Belt 7010509077
1 × $1,278.04 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.75 -
×
3M 15289, 663FC, 2-3/4" X 160", 40u, Diamond Trizact Belts 7010508900
1 × $2,343.05 -
×
Standard Abrasives 547003, Adapter, 5/8"-11 Male x 3/8"-24 Female, 7010368726
1 × $10.22
3M 99419, Wetordry Sanding Sheets 99419NA, 9 in x 11 in, 600 grit, 7000126423, 25 sheets per pack
$16.99
Factory Stock, 7-10 Day Leadtime, Priced Per Pack
3M Wetordry allows you to sand between coats of varnish and paint or other finishes. Can be used with water to reduce clogging and extend abrasive life. Ideal for sanding metal for repainting or prior to primer coat.
3M Pro pak Wet or Dry abrasives are specially designed for wet or dry sanding. Use 3M Imperial Wetordry Sandpaper for a premiere finish on lacquers, primers, sealers, plastics and paints. For final or between coats sanding.
Related products
Utility Cloth Rolls
3M 19764, Utility Cloth Sheet 314D, 9 in x 11 in P320 J-weight, 7000000352
$1.37
Utility Cloth Rolls
3M 19765, Utility Cloth Sheet 314D, 9 in x 11 in P280 J-weight, 7000000353
$1.37
Non-Woven Hand Pads
3M 07415, Hand Sanding Wood Finishing Pad 7415NA, 4.375 in x 11 in, Gray Fine, 7010383728
$1.77
$25.96