-
×
Standard Abrasives 713296, Aluminum Oxide Handy Roll, P320 J-weight, 2 in x 50 yd, 7100034517
1 × $47.66 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $9.52 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
200 × $0.95 -
×
3M 15913, Scotch-Brite Roloc Disc High Strength, TR, 2 in X NH A Medium, 7000000710
200 × $1.72 -
×
Dynabrade 92208 1/8" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
50 × $1.02 -
×
3M 45208, Disc Pad Face Plate, 5 in Soft White, 7000120521
10 × $21.82 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33 -
×
3M 20927, PSA Cloth Disc 348D, P240 X-weight, 1 in x NH, Die 100N, 7000118918
500 × $0.39 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14 -
×
Insize HDT-PB350, HAMMER IMPACT BRINELL HARDNESS TESTER, 6940561966657
1 × $1,703.33 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
Dynabrade 91430 1/2" W x 12" L 120 Grit A/O DynaCut Belt, 50/pack
100 × $1.29
-
×
Standard Abrasives 78527, Ceramic Pro Type 29 Flap Disc, 645139, 7 in x 5/8-11 40 Y-weight, 7010301277
5 × $17.89
3M 88601, Pro-Pak Wetordry Sandpaper 88601NA, 9 in x 11 in (22.8 cm x 27.9 cm), 7100079085
$20.49
Factory Stock, 7-10 Day Leadtime, Priced Per Pack
3M Wetordry allows you to sand between coats of varnish and paint or other finishes. Can be used with water to reduce clogging and extend abrasive life. Ideal for sanding metal for repainting or prior to primer coat.
3M Pro pak Wet or Dry abrasives are specially designed for wet or dry sanding. Use 3M Imperial Wetordry Sandpaper for a premiere finish on lacquers, primers, sealers, plastics and paints. For final or between coats sanding.
