-
×
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $1,025.00 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $4.57 -
×
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
1 × $129.94 -
×
3M 97419, Aluminum Foil Tape 3380, Silver, 48 mm x 45 m, 3.25 mil, 7000049613
24 × $16.94 -
×
3M 26132, PPS Series 2.0 Adapter, Type S37, 5/8 Male, 11 UNC Modified, 7100135949
1 × $25.96 -
×
3M 05519, Sanding Block, Rubber, 2-3/4 in x 5 in, 7000000587
10 × $18.37 -
×
Dynabrade 51623 .1 hp Straight-Line Extension Pencil Grinder, Central Vacuum, 1/8" Collet
1 × $634.00 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
18 × $9.52 -
×
Standard Abrasives 78514, Ceramic Pro Type 27 Flap Disc, 645111, 4-1/2 in x 7/8 80 Y-weight, 7010331462
10 × $7.50
3M 88600, Pro-Pak Wetordry Sanding Sheets 88600NA, 9 in x 11 in, 180C grit, 7000126434, 25 sheet per pack
$19.56
Factory Stock, 7-10 Day Leadtime, Priced Per Pack
3M Wetordry allows you to sand between coats of varnish and paint or other finishes. Can be used with water to reduce clogging and extend abrasive life. Ideal for sanding metal for repainting or prior to primer coat.
3M Pro pak Wet or Dry abrasives are specially designed for wet or dry sanding. Use 3M Imperial Wetordry Sandpaper for a premiere finish on lacquers, primers, sealers, plastics and paints. For final or between coats sanding.
