-
×
Standard Abrasives 710190, Cartridge Roll Mandrel, 2560020, 1/8 in x 1 in x 1/4 in x 1-1/4 in x 2-3/4 in CM-9, 7000121790
5 × $4.17 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $11.43 -
×
Dynabrade 95848 Dynabrade Gear Oil
2 × $12.98 -
×
3M 00581 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 2-1/2 in x 60 in, 7010329198
10 × $37.87 -
×
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
1 × $915.00 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
2 × $1,012.00 -
×
Dynabrade 94857 12' Max Flow 10mm I.D. Air Hose Assembly, Male (1/4") / Male (1/4") Fitting Ends Included
2 × $103.17 -
×
3M 05742, Hookit Soft Hand Block, 2-3/4 x 5 in, 7000045436
10 × $44.97 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
3M 01333, PSA Cloth Disc 348D, 60 X-weight, 3 in x NH, Die 300V, 7000118880
200 × $0.94 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
1500 × $0.67 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
3M 20356, Hookit Clean Sanding Low Profile Disc Pad, 6 in x 3/8 in x 5/16-24 External 52 Holes Red Foam, 7100027464
10 × $37.88 -
×
3M 35519, Rubber Sanding Block, 2-3/4 in x 5 in, 7000126109
5 × $19.14 -
×
3M 77157 Scotch-Brite Durable Flex Belt, 77157, 1/2 in x 18 in, A MED, Trial Pack, 7010365702
10 × $19.33 -
×
3M 26620, Accuspray Atomizing Head Refill Pack for 3M PPS Series 2.0,Red, 2.0 mm, 7100141414 (4 Nozzles/Kit)
6 × $31.20 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $0.95 -
×
3M 64469 Scotch-Brite Durable Flex Belt, DF-BL, A/O Fine, 3/4 in x 18 in, 7100105418
20 × $12.17
3M 09317, Regalite Floor Surfacing Rolls, 12 in x 50 yd, 752I, 40 Grit, 7010384135
$360.86
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
