-
×
3M 76623, Roloc Disc 777F, 50 YF-weight, TR, 1 in, Die R100N, 7000045619
500 × $0.65 -
×
3M 17098, Hood Assembly with Sealed Seams Inner Shroud and Premium Head Suspension S-857, 7000002350, 1 EA/Case
1 × $185.27 -
×
3M 28217, Cubitron II Roloc Disc 984F, 60+ YF-weight, TR, 3 in, Die R300V, 7010326790
200 × $1.78 -
×
3M 01333, PSA Cloth Disc 348D, 60 X-weight, 3 in x NH, Die 300V, 7000118880
200 × $0.94 -
×
3M 76900, Cloth Belt 340D, 50 X-weight, 37 in x 60 in, Film-lok, Single-flex, 7010361975, 3 per case
3 × $51.11 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
Norton 66261009191 - 2" Blank Coarse Grade Rapid Prep Non-Woven Surface Preparation Disc, 25 Each
25 × $1.60 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $80.58 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 250u
12 × $8.20 -
×
Dynabrade 60052 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 35,000 RPM, 3/32" Collet
1 × $1,025.00 -
×
3M 20922, PSA Cloth Disc 348D, 60 X-weight, 1-1/2 in x NH, Die 150S, 7010326528.
500 × $0.48 -
×
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
1 × $274.26 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $11.06 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33 -
×
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
15 × $7.30 -
×
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $1,025.00 -
×
Standard Abrasives 725005, Buff and Blend Cross Buff HS, A/O Medium, 1-1/2 in x 1/2 in x 3 Ply x 8-32, 7000046826
50 × $6.37 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $9.18 -
×
Standard Abrasives 708751, PSA A/O Disc, 12 in x NH, 60, 7010370081
10 × $5.83
3M 09317, Regalite Floor Surfacing Rolls, 12 in x 50 yd, 752I, 40 Grit, 7010384135
$360.86
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
