-
×
3M 31381, Cubitron II Hookit Marine Sanding Abrasive Disc 737U, 31381, 6 in, 120+, 7100062433
80 × $19.02 -
×
3M 34565, Cubitron II Net Sheet Roll, 220+, 70 mm x 10 m, 7100247497, 6 Rolls/Case
6 × $27.69 -
×
3M 05530, Stikit Soft Hand Pad, 2-3/4 in x 5-1/2 in x 3/8 in, 7000028351
50 × $5.53 -
×
ACS Diamond Cloth Belt, CX1250 3/8" X 120" 125U
16 × $27.50 -
×
3M 88906, PSA Cloth Disc 348D, 36 X-weight, 12 in x NH, Die 1200B, 7000118898
10 × $8.91 -
×
3M 28324, Clean Sanding Interface Pad, 3 in x 4 in x 1/2 in 33 Holes, 7100138159
10 × $14.83 -
×
Standard Abrasives 827620, Buff and Blend HP Power Pad, 6 in x 9 in, A VFN, 7010310293, 50 ea/Case
1 × $190.45 -
×
3M 04229, Scotch-Brite Hand Pad 7447B, HP-HP, A/O Very Fine, 6 in x 9 in, 7000027560, 60 ea/Case
1 × $77.93 -
×
3M 04029, Scotch-Brite Hand Pad 7447, HP-HP, A/O Very Fine, Maroon, 6 in x 9 in, 7000000728, 60/Case
2 × $82.43 -
×
Dynabrade 92114 1/2" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
50 × $1.20 -
×
3M 98534, Premium Matte Cloth (Gaffers) Tape GT3, Black, 72 mm x 50 m, 11 mil, 7010291525
16 × $90.13 -
×
ACS Diamond Cloth Belt, CX1250 1" X 42" 200U
6 × $25.65
-
×
Dynabrade 91163 3/8" W x 13" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $1.60
-
×
3M 65033, Scotch-Brite Diamond Wheel, 645DC 6 in x 1/2 in x 1 in, 7010365574, Box of 3
1 × $531.70 -
×
3M 05440, Stikit Hand Block, Hard 2-3/4 in x 5 in, 7000045764
10 × $26.95 -
×
3M 65056, Scotch-Brite Blending Hand Pad 7446, HP-HP, SiC Medium, 6 in x 9 in, 7100082599, 40/Case
1 × $103.26 -
×
Dynabrade 92207 1/8" W x 12" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $1.77
-
×
ACS Diamond Cloth Belt, CX1250 3" X 30" 75U
2 × $57.10
-
×
3M 07414, Hand Sanding Metal Finishing Pad 7414NA, 4.375 in x 11 in, Maroon Medium, 7010315820
10 × $1.77 -
×
Standard Abrasives 701616, PSA A/O Disc, 12 in x NH, 50, 7010369977
10 × $6.01
3M 09317, Regalite Floor Surfacing Rolls, 12 in x 50 yd, 752I, 40 Grit, 7010384135
$360.86
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
Related products
Overspray Protectors
3M 30202, Disposable Plastic Wheel Maskers, 12 in – 15 in, 125 per box, 7000125074
$61.60
