-
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67 -
×
3M 26139, PPS Series 2.0 Adapter, Type S43, 1/4 Male, 19 Thread BSP, 7100135337
4 × $25.96 -
×
3M 66626, Cloth Belt 341D, 50 X-weight, 4 in x 36 in, Fabri-lok, Single-flex, 7010308385, 25 per case
25 × $6.86 -
×
3M 34574, Cubitron II Net Sheet Roll, 150+, 115 mm x 10 m, 7100247501, 6 Rolls/Case
12 × $43.97 -
×
3M 19766, Utility Cloth Sheet 314D, 9 in x 11 in P240 J-weight, 7000000354
50 × $1.37 -
×
Standard Abrasives 704491, Cartridge Roll Mandrel, 3/16 in x 3/4 in x 1/4 in x 1 in x 2-3/4 in CM-15, 7000121768
5 × $4.88 -
×
3M 36882, Self-Stick Liquid Protection Fabric, Blue, 56 in x 300 ft, 7100169350
3 × $1,246.87 -
×
3M 36880, Self-Stick Liquid Protection Fabric, Blue, 36 in x 300 ft, 7100169352
1 × $901.76 -
×
3M 34551, Cubitron II Net Sheet Roll, 120+, 80 mm x 10 m, 7100247481, 6 Rolls/Case
12 × $28.94 -
×
Standard Abrasives 78526, Ceramic Pro Type 29 Flap Disc, 645135, 4-1/2 in x 7/8 80 Y-weight, 7010369546, 10 per case
10 × $7.50 -
×
3M 34555, Cubitron II Net Sheet Roll, 240+, 80 mm x 10 m, 7100247339, 6 Rolls/Case
6 × $31.57 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,186.90 -
×
Standard Abrasives 717078, Cartridge Roll Mandrel, 3/32 in x 3/4 in x 1/4 in x 1 in x 2-3/4 in CM-2E, 7000121813
5 × $4.88 -
×
3M 34556, Cubitron II Net Sheet Roll, 320+, 80 mm x 10 m, 7100283765, 6 Rolls/Case, (Previously Item# 7100247340)
6 × $28.94 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $10.89 -
×
3M 26129, PPS Series 2.0 Adapter, Type S34, 3/8 Female, 18 Thread NPS, 7100135938
4 × $38.43 -
×
3M 36878, Self-Stick Liquid Protection Fabric, Blue, 14 in x 300 ft, 7100169505
1 × $311.73 -
×
3M 34550, Cubitron II Net Sheet Roll, 80+, 80 mm x 10 m, 7100283781, 6 Rolls/Case, (Previously Item# 7100247220)
6 × $28.94 -
×
3M 34575, Cubitron II Net Sheet Roll, 180+, 115 mm x 10 m, 7100247510, 6 Rolls/Case
6 × $42.69 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33 -
×
3M 30202, Disposable Plastic Wheel Maskers, 12 in - 15 in, 125 per box, 7000125074
1 × $61.60
3M 09317, Regalite Floor Surfacing Rolls, 12 in x 50 yd, 752I, 40 Grit, 7010384135
$360.86
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
