-
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
2 × $1,598.86 -
×
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
1 × $871.15 -
×
3M 34577, Cubitron II Net Sheet Roll, 240+, 115 mm x 10 m, 7100247504, 6 Rolls/Case
6 × $42.69 -
×
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 125U
12 × $5.70 -
×
Insize 4142-200, GRANITE SQUARE WITH V GROOVE, 7.9x7.9x7.9", 6928640375538
2 × $2,859.38 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $431.21 -
×
Dynabrade 15006 Mini-Dynafile II Abrasive Belt Tool Versatility Kit
1 × $789.82 -
×
Standard Abrasives 717078, Cartridge Roll Mandrel, 3/32 in x 3/4 in x 1/4 in x 1 in x 2-3/4 in CM-2E, 7000121813
5 × $4.88 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
2 × $1,493.91 -
×
3M 06742, Overspray Protective Sheeting, 20 ft x 250 ft, 7000120043
1 × $72.49 -
×
3M 05519, Sanding Block, Rubber, 2-3/4 in x 5 in, 7000000587
10 × $18.37 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
2 × $27,619.39 -
×
3M 34552, Cubitron II Net Sheet Roll, 150+, 80 mm x 10 m, 7100247337, 6 Rolls/Case
6 × $28.94 -
×
3M 34567, Cubitron II Net Sheet Roll, 320+, 70 mm x 10 m, 7100247338, 6 Rolls/Case
6 × $26.89 -
×
Dynabrade X52V 5" (127 mm) Dia. Central-Vacuum Dynorbital Extreme Random Orbital Sander, .3 HP, 12,000 RPM, 3/32" Orbit, Hook-Face
1 × $221.85 -
×
3M 84177, Microfinishing PSA Film Disc Roll 366L, 30 Mic 3MIL, Type D, 5 in x NH, Die 500X, 7000118206, 125 discs per roll
4 × $112.92
-
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,186.90 -
×
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
1 × $409.44 -
×
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
1 × $400.59 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $24.56
3M 09314, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, P100 Grit, 7010384134
$142.60
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
