-
×
Standard Abrasives 78509, Ceramic Pro Type 27 Flap Disc, 645103, 4-1/2 in x 5/8-11 40 Y-weight, 7010310618, 10 per case
10 × $9.26 -
×
3M 34552, Cubitron II Net Sheet Roll, 150+, 80 mm x 10 m, 7100247337, 6 Rolls/Case
6 × $28.94 -
×
3M 66626, Cloth Belt 341D, 50 X-weight, 4 in x 36 in, Fabri-lok, Single-flex, 7010308385, 25 per case
25 × $6.86 -
×
3M 16205, PPS Disposable Lids, Midi, 125 Micron Full Diameter Filters, 7000120049
25 × $40.06 -
×
Standard Abrasives 32920, PSA A/O Disc, 708027, 6 in x NH, 120, 7100083004
50 × $1.27 -
×
3M 34784, 663FC, 3" X 30", 20u, Trizact Diamond Belt, 7100063665
1 × $0.00 -
×
Standard Abrasives 704491, Cartridge Roll Mandrel, 3/16 in x 3/4 in x 1/4 in x 1 in x 2-3/4 in CM-15, 7000121768
5 × $4.88 -
×
3M 30697, Cloth Belt 577F, 120 YF-weight, 2 in x 72 in, Film-lok, Single-flex, 7010300158, 50 per case
50 × $7.09 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,583.72 -
×
3M 71512, Cloth Belt 340D, 50 X-weight, 3 in x 18 in, Fabri-lok, Single-flex, 7010294780, 25 per case
25 × $3.12 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $24.56 -
×
3M 26125, PPS Series 2.0 Adapter, Type S29, 8 mm Male, 1.25 mm Thread, 7100135955
1 × $25.96 -
×
3M 36878, Self-Stick Liquid Protection Fabric, Blue, 14 in x 300 ft, 7100169505
1 × $311.73 -
×
3M 36877, Self-Stick Liquid Protection Fabric, Blue, 6 in x 300 ft per Roll, 7100169347, 4 Rolls Per Pack
1 × $534.40 -
×
Standard Abrasives 32985, Aluminum Oxide Overlap Disc, 714721, 60 Grit, 2 in x 8-32 x 2 Ply, 7100116380
100 × $1.67 -
×
3M 66619, Cloth Belt 341D, 50 X-weight, 4 in x 24 in, Fabri-lok, Single-flex, 7010360692, 25 per case
25 × $5.52
3M 09314, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, P100 Grit, 7010384134
$142.60
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
