-
×
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $1,025.00 -
×
3M 65086, Scotch-Brite Diamond Wheel, 6" x 1" x 1" 645DC, 7010329878
1 × $945.02 -
×
3M 13800, Scotch-Brite Star, 1-1/2 in A VFN LS, 7000120969
100 × $3.24 -
×
3M 19631, Hookit Film Disc 360L, P600, 5 in x NH, D/F 5HL, Die 500FH, 7010299936, 500 per case
500 × $0.53 -
×
ACS 2" Diamond Roloc Disc, 80 Mesh, W/ Plastic Button, RD2-080M-SP
10 × $15.00 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $9.52 -
×
3M 16611, Accuspray Atomizing Head, Clear, 1.8 mm, 7000000500 (4 Nozzles/Kit)
6 × $29.64 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
Dynabrade 51624 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
1 × $603.00 -
×
3M 06512, Scotch Steel Gray Masking Paper, 06512, 12 in x 1000 ft, 3 per case, 7010327747
3 × $88.10
-
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $453.00 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $388.51 -
×
Dynabrade 55501 .1hp Pencil Grinder, Twin Turbine, 100,000 RPM, Nickel-Plated Aluminum Housing, 3mm Collet
1 × $529.55 -
×
3M 62612, Scotch-Weld Threadlocker TL71, Red, 10 mL Bottle, 7100039197, 10/case
10 × $13.32 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
3M 06840, Booth Coating, 5 gal, 7000120531
1 × $467.27 -
×
3M 77408, Cloth Belt 777F, 50 YF-weight, 1/2 in x 24 in, Fabri-lok, Single-flex, 7000118438, 200 per case
200 × $2.66
3M 09314, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, P100 Grit, 7010384134
$142.60
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
