-
×
3M 06742, Overspray Protective Sheeting, 20 ft x 250 ft, 7000120043
1 × $72.49 -
×
3M 19568, Cloth Belt 777F, 50 YF-weight, 3/4 in x 18 in, Fabri-lok, Full-flex, 7000148229, 200 per case
200 × $2.70 -
×
3M 36864, Dirt Trap Material Floor Dispenser, 56 in, 7000119908
1 × $873.93 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $963.87 -
×
3M 34550, Cubitron II Net Sheet Roll, 80+, 80 mm x 10 m, 7100283781, 6 Rolls/Case, (Previously Item# 7100247220)
6 × $28.94 -
×
3M 34555, Cubitron II Net Sheet Roll, 240+, 80 mm x 10 m, 7100247339, 6 Rolls/Case
6 × $31.57 -
×
3M 07415, Hand Sanding Wood Finishing Pad 7415NA, 4.375 in x 11 in, Gray Fine, 7010383728
10 × $1.77 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
3M 34551, Cubitron II Net Sheet Roll, 120+, 80 mm x 10 m, 7100247481, 6 Rolls/Case
12 × $28.94 -
×
3M 26710, PPS Series 2.0 Spray Cup System UV Kit, Standard (22 fl oz,
650 mL), 200 Micron Filter, 7100128902
1 × $142.27 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,493.91 -
×
3M 05519, Sanding Block, Rubber, 2-3/4 in x 5 in, 7000000587
10 × $18.37 -
×
3M 34566, Cubitron II Net Sheet Roll, 240+, 70 mm x 10 m, 7100247511, 6 Rolls/Case
6 × $26.89 -
×
3M 47183, Polyurethane Adhesive Sealant 551, White, 600 mL Sausage Pack, 7100197991, 12/Case
12 × $18.00 -
×
3M 06728, Premium Plastic Sheeting with 233+ Masking Tape (36 mm), 16
ft x 400 ft, 7100139893
1 × $87.14 -
×
3M 26582, Accuspray Refill Pack for PPS Series 2.0, Blue, 1.2 mm, 7100152952
5 × $10.20 -
×
3M 34563, Cubitron II Net Sheet Roll, 150+, 70 mm x 10 m, 7100247342, 6 Rolls/Case
6 × $26.89 -
×
3M 84584, Cloth Belt 777F, 50 YF-weight, 3 in x 264 in, Film-lok, Single-flex, 7010309169, 5 per case
5 × $61.22
3M 09314, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, P100 Grit, 7010384134
$142.60
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
