-
×
3M 02960, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1 in x 1 in, 7100009186, Box of 3
1 × $132.29 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,569.00 -
×
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
1 × $438.51 -
×
3M 76632, Roloc Disc 777F, 50 YF-weight, TR, 3 in, Die R300V, 7000045628
200 × $1.48 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
2 × $6,424.71 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
750 × $4.14 -
×
3M 07415, Hand Sanding Wood Finishing Pad 7415NA, 4.375 in x 11 in, Gray Fine, 7010383728
10 × $1.77 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $4.57 -
×
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
1 × $274.26 -
×
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
1 × $175.93 -
×
3M 80835, Flexible Diamond Hand File 6210J, No 2, Yellow, 18, N40, 7000082160, 10 Per Case
1 × $93.34 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $722.00 -
×
Dynabrade 94852 12' Max Flow 5/16" I.D. Air Hose Assembly, Female (1/4") / Male (1/4") Fitting Ends Included
1 × $73.36 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $80.58 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33 -
×
3M 16580, Accuspray ONE Spray Gun System with Standard PPS, 7100099202
4 × $337.64 -
×
3M 71512, Cloth Belt 340D, 50 X-weight, 3 in x 18 in, Fabri-lok, Single-flex, 7010294780, 25 per case
25 × $3.12
3M 09314, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, P100 Grit, 7010384134
$142.60
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
Related products
