-
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
3M 06396, Automotive Adhesion Promoter, Sponge Applicator Packet 06396, 2.5 cc, 7100009578
1 × $57.68 -
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3 × $43.00 -
×
3M 62605, Scotch-Weld Threadlocker TL42, Blue, 10 mL Bottle, 7100039190, 10/case
10 × $13.32 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 30u
12 × $7.60 -
×
ACS Diamond Cloth Belt, CX1250 1" X 64" 125U
6 × $40.60 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $4.57 -
×
Standard Abrasives 78514, Ceramic Pro Type 27 Flap Disc, 645111, 4-1/2 in x 7/8 80 Y-weight, 7010331462
10 × $7.50 -
×
3M 85562, Heavy Duty Duct Tape 3939, Silver, 72 mm x 54.8 m, 9.0 mil, 7000048815
12 × $25.92 -
×
Dynabrade 78423 4-1/2" Dia. x 3/8" Very Fine DynaBrite Surface Conditioning Disc, 25/pack
25 × $5.21 -
×
3M Super Abrasives Roloc Disc, 2" Type-R, Medium AO High Strength, Box of 50
1 × $77.50 -
×
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
2 × $502.78 -
×
Dynabrade 51700 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $558.00 -
×
3M 16553, Scotch-Brite Extra Duty Hand Pad 6444, 6 in x 9 in, 7000028548, 60/Case
1 × $100.58 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33 -
×
3M 86407, Scotch-Weld Multi-Material Composite Urethane Adhesive DP6310NS,Green, 48.5 mL Duo-Pak, 7100109829, 12/case
12 × $18.04
3M 09312, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, 60 Grit, 7010384133
$180.08
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
