-
×
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
1 × $435.37 -
×
Dynabrade 93336 Carbide Burr, 3/8" Dia., SF-3 D/C Burr, Tree Radiused End, 3/4" Flute L, 1/4" Shank
1 × $40.32 -
×
Norton 66261199696 - 3" X 1/4" X 1/4" Vortex Rapid Blend Unified Wheel, 7AM U2305, 40 Each
40 × $13.04 -
×
Dynabrade 51703 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 1/8" Collet
1 × $558.00 -
×
Dynabrade 51756 .1 hp Straight-Line Extension Pencil Grinder, Rear Exhaust, 35,000 RPM, 1/8" Collet
1 × $603.00 -
×
3M 05777, Hookit Soft Interface Pad, 6 x 1/2 x 3/4 inch, 7000028239
10 × $20.46 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.67 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
1000 × $0.60 -
×
3M 69457, Cloth Belt 777F, 60 YF-weight, 1/2 in x 12 in, Fabri-lok, Single-flex, 7010299175, 200 per case
200 × $2.31 -
×
3M 88870, PSA Cloth Disc 777F, 80 YF-weight, 12 in x NH, Die 1200B, 7000120239
10 × $13.79 -
×
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
200 × $0.95 -
×
Dynabrade 51629 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 1/8" Collet
1 × $603.00 -
×
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 125U
12 × $5.70 -
×
3M 49689, PSA Cloth Disc 348D, 60 X-weight, 10 in x NH, Die 1000C, 7010326501
10 × $5.76 -
×
3M 30709, Cloth Belt 577F, 120 YF-weight, 1/2 in x 12 in, Fabri-lok, Single-flex, 7010363107, 200 per case
200 × $1.39 -
×
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
1 × $129.94 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
Dynabrade 51708 .1 hp Straight-Line Pencil Grinder, 35,000 RPM, 3/32" Collet
1 × $558.00 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
3M 28217, Cubitron II Roloc Disc 984F, 60+ YF-weight, TR, 3 in, Die R300V, 7010326790
200 × $1.78
3M 09312, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, 60 Grit, 7010384133
$180.08
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
