-
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74 -
×
3M 30702, Cloth Belt 577F, 50 YF-weight, 2 in x 132 in, Film-lok, Single-flex, 7010363104, 50 per case
50 × $12.36 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $28,988.00 -
×
3M 97967, Foam Fast Spray Adhesive 74 CA, Low VOC <25%, Clear, 24 fl oz Can (Net Wt 19.0 oz), 7100014108, 12/Case
12 × $25.13 -
×
3M 42840, Electrically Conductive Single-Sided Tape 1050TC-25, 100 mm x 10 m, 8 Rolls/Case, 7100313409
8 × $50.00 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.67 -
×
3M 20360, Scotch-Weld Epoxy Adhesive 2216, Gray, Part B, 5 Gallon Drum (Pail), 7000046360
5 × $509.65 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
3M 28214, Cubitron II Roloc Disc 984F, 60+ YF-weight, TR, 2 in, Die R200P, 7010361116
200 × $1.40
3M 09312, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, 60 Grit, 7010384133
$180.08
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
