-
×
3M 88869, PSA Cloth Disc 777F, 36 YF-weight, 12 in x NH, Die 1200B, 7000120240
10 × $18.06 -
×
3M 20227, Scotch-Seal Metal Sealant 2084, Silver, 5 oz Tube, 7000046343, 36/Case
36 × $23.01 -
×
Standard Abrasives 713276, Aluminum Oxide Handy Roll, P180 J-weight, 2 in x 50 yd, 7100037246
1 × $47.66 -
×
Standard Abrasives 726072, A/O C2 Straight Precision Cartridge Roll, 5/8 in x 2-1/2 in x 1/4 in 120, 7100098781
25 × $4.94 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
3M 41594, Polyurethane Sealant 540, Gray, 310 mL Cartridge, 7000000942, 12/Case
12 × $9.58 -
×
Dynabrade 51705 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 3/32" Collet
1 × $558.00 -
×
3M 66165, Wind Protection Tape Edge Sealer W2600, 50 ml (1.7 fluid ounce), 7100008766, 12/Case
12 × $69.98 -
×
3M 20911, PSA Cloth Disc 348D, 50 X-weight, 2 in x NH, Die 200P, 7000118871
200 × $0.82 -
×
Dynabrade 51622 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
1 × $603.00 -
×
3M 88905, PSA Cloth Disc 348D, 40 X-weight, 12 in x NH, Die 1200B, 7010294665
10 × $8.41 -
×
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
1 × $129.94 -
×
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
15 × $9.52 -
×
3M 05516, Polyurethane Glass Adhesive Sealant 590, Black, 310 mL Cartridge, 7100060280, 12/Case
12 × $18.44 -
×
3M 21762, Stikit Cloth Disc Roll 341D, 60 X-weight, 6 in x NH, Die 600Z, 7000118780
400 × $169.03
3M 09312, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, 60 Grit, 7010384133
$180.08
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
