-
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
3M 20230, Scotch-Seal Metal Sealant 2084, Silver, 5 Gallon Drum (Pail), 7000046344
5 × $198.10 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
3M 09413, Scotch-Brite Contour Surface Paint and Varnish Remover 9413NA, 7000052005
10 × $5.79 -
×
3M 94717, Cubitron ll Cloth Belt 947A, 80+ X-weight, 1 in x 30 in, Fabri-lok, Single-flex, 7010294445, 200 per case
200 × $3.73 -
×
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 250U
12 × $6.15 -
×
3M 71346, 675L, 1" X 120", 125u, Diamond Microfinishing Film Belts, 7010534823
1 × $97.89 -
×
3M 16199, PPS Disposable Lids, Standard and Large, 125 Micron Full
Diameter Filter, 25 lids per case, 7000119821
1 × $43.32 -
×
3M 27490, 641WY, 3" X 30", 1200 Mesh, Diamond Cloth Belts, 7010508907
1 × $142.63 -
×
3M 57173, Temflex Cotton Friction Tape 1755, 3/4 in x 60 ft, Black, 7000058870
20 × $7.66 -
×
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
200 × $0.95 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
3M 16159, PTFE Glass Cloth Tape 5453, Brown, 3/4 in x 36 yd, 8.2 mil, 7000050132
12 × $193.37 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
Standard Abrasives 863110, A/O Unitized Wheel, 631, 2 in x 1/4 in x 1/4 in, 7000144629
10 × $5.31 -
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.98 -
×
Dynabrade 82462 5" Dia. x 400 Grit A/O PSA Filmbac DynaCut Disc, 100/Box
100 × $1.05 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $4.57 -
×
3M 00110, Adhesive Transfer Tape Extended Liner 920XL, Translucent, 1/2 in x 500 yd, 1 mil, 7100259600
12 × $57.99 -
×
3M 87147, PSA Cloth Disc 777F, 5 x NH, 36 YF-weightt, 7010308524
250 × $3.18 -
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
3M 66261, Wind Protection Tape Edge Sealer W2600, 50 ml (1.7 fluid ounce), 7000049496, 12/Case
12 × $69.98 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
3M 30702, Cloth Belt 577F, 50 YF-weight, 2 in x 132 in, Film-lok, Single-flex, 7010363104, 50 per case
50 × $12.36
3M 09310, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, 40 Grit, 7010384132
$229.48
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
