-
×
3M 87179, Scotch-Weld Epoxy Adhesive 2216NS, Tan, Part B, 5 Gallon Drum (Pail), 7010309882
5 × $519.53 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
ACS Diamond Cloth Belt, CX1250 1/2" X 72" 125U
12 × $23.20 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $500.06 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
Dynabrade 51731 .1 hp Straight-Line Pencil Grinder, 60,000 RPM, 1/8" Collet
1 × $634.00 -
×
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
1 × $420.00 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.25 -
×
3M Scotchkote Liquid Epoxy Coating Spray System HSS Mix Nozzle, RightAngle, 7000058900
24 × $168.76 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $25.78 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $11.06 -
×
3M 80835, Flexible Diamond Hand File 6210J, No 2, Yellow, 18, N40, 7000082160, 10 Per Case
1 × $93.34 -
×
3M 14559, Roloc Disc 361F, P150 XF-weight, TR, 2 in, Die R200P, 7000119021
200 × $0.97 -
×
3M 49937, Roloc Disc 361F, 60 YF-weight, TSM, 2 in, Die RS200PM, 7000119016
200 × $1.01 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
Dynabrade 51708 .1 hp Straight-Line Pencil Grinder, 35,000 RPM, 3/32" Collet
1 × $558.00 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
3M 07466, Scotch-Brite Roloc+ Clean and Strip Disc 7466, 4 in x 1/2 in S XCS, 7000120779, 10/case
10 × $15.07 -
×
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
1 × $915.00 -
×
Dynabrade 59339 Vacuum Cuff, 1", w/Groove
1 × $13.53 -
×
Standard Abrasives 32985, Aluminum Oxide Overlap Disc, 714721, 60 Grit, 2 in x 8-32 x 2 Ply, 7100116380
100 × $1.67 -
×
3M 66626, Cloth Belt 341D, 50 X-weight, 4 in x 36 in, Fabri-lok, Single-flex, 7010308385, 25 per case
25 × $6.86
3M 09310, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, 40 Grit, 7010384132
$229.48
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
Related products
