-
×
3M 66630, Cloth Belt 341D, 50 X-weight, 6 in x 48 in, Film-lok, Single-flex, 7000118864, 20 per case
20 × $11.98 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
Dynabrade 51632 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 1/8" Collet
2 × $603.00 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,569.00 -
×
3M 27464, Cloth Belt 340D, 50 X-weight, 4 in x 24 in, Fabri-lok, Single-flex, 7000119041, 25 per case
25 × $5.69 -
×
Standard Abrasives 708751, PSA A/O Disc, 12 in x NH, 60, 7010370081
10 × $5.83 -
×
Insize 7341-4S, PIN GAGE HANDLE (with 1pc handle and 6 pairs of collecting bushes),.180-.228", 6928640360732
1 × $39.25 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $9.52 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $25.78 -
×
3M 85492, Scotch Foil Tape 3311, Silver, 2 in x 10 yd, 3.6 mil, 2MMX1200M, 7010334860
24 × $5.52 -
×
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
1 × $915.00 -
×
Dynabrade 51700 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $558.00 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39
-
×
Dynabrade 51750 .1 hp Straight-Line Extension Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $603.00 -
×
Standard Abrasives 712149, Aluminum Oxide Handy Roll, P100 J-weight, 1-1/2 in x 50 yd, 7010295370
1 × $37.54 -
×
Dynabrade 51812 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 3/32" Collet
1 × $751.00 -
×
Standard Abrasives 724277, Buff and Blend Circle Buff GP, A/O Very Fine, 2 in x 2 Ply x 8-32, 7010368699
25 × $6.64 -
×
3M 80176, Cloth Belt 777F, 50 YF-weight, 6 in x 48 in, Film-lok, Single-flex, 7010307734, 20 per case
20 × $34.29
3M 09310, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, 40 Grit, 7010384132
$229.48
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
