-
×
ACS Diamond Cloth Belt, CX1250 1" X 72" 125U
6 × $45.50 -
×
Dynabrade 51700 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $558.00 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 175u
12 × $7.60 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
1000 × $0.60 -
×
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 250U
12 × $6.15
-
×
3M 89366, Speedglas 9100 Welding Helmet 06-0300-51SW, with Side Windows, Headband and Silver Front Panel, 1 EA/Case, 7000127133
1 × $100.44 -
×
3M 19674, Scotch-Seal Industrial Sealant 800, Reddish Brown, 5 oz Tube, 7000000792, 36/Case
36 × $23.31 -
×
3M 62612, Scotch-Weld Threadlocker TL71, Red, 10 mL Bottle, 7100039197, 10/case
10 × $13.32 -
×
3M 82238, Scotch-Weld Epoxy Adhesive 420, Off-White, Part B, 5 Gallon Drum(Pail), 7100001145
5 × $327.91 -
×
Dynabrade 92118 1/4" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
50 × $1.15 -
×
Dynabrade 51810 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/8" Collet
1 × $751.00 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.58 -
×
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
1 × $274.26 -
×
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $1,721.00 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
600 × $1.74 -
×
3M 20932, PSA Cloth Disc 348D, 80 X-weight, 1 in x NH, Die 100N, 7000118914
500 × $0.40 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $4.57 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
Norton 66254489957 Wheel, Vortex-7am, 6" X 1/2" X 1" C2312 Nor VTME7 PH VTC+, 4 Each
4 × $84.19 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
Standard Abrasives 701616, PSA A/O Disc, 12 in x NH, 50, 7010369977
10 × $6.01
3M 09310, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, 40 Grit, 7010384132
$229.48
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
Related products
